fix different bug, not zeroing rgb, not manipulating over each datapoint

avr_adc.c

@@ -37,16 +37,17 @@ void setupADC(void)
 				//_BC(REFS1) |	//Set_Vref
 				//_BC(MUX3)  |	//
 				//_BC(MUX2)  |	//
-				_BS(MUX1)  |	//
+			//	_BS(MUX1)  |	//
 				_BS(MUX0)  |	//PORT Select PB3
-				_BS(ADLAR) ;		//left shift conversion results(used in 8bit mode)
-
+				_BS(ADLAR); 		//left shift conversion results(used in 8bit mode)
+	//	ADCSRB = _BS(
 		ADCSRA = _BS(ADEN) |	//Enable ADC
 				//_BC(ADATE) |	//Disable AutoTrigger aka Freerunning mode
-				_BS(ADPS2) |	//Select Prescaler	clk/32
-				//_BC(ADPS1) |
-				_BS(ADPS0);
-
+			//	_BS(ADPS1) |	//Select Prescaler
+				_BS(ADPS0) |	//prescaler 128
+				//_BS(ADPS1) |
+				_BS(ADPS2);
+		ADCSRA &= ~(1<<ADATE);
 }
 
 

main.c

@@ -1,4 +1,3 @@
-#define F_CPU 16000000UL
 
 #include<util/delay.h>
 #include<avr/io.h>
@@ -6,11 +5,12 @@
 #include"avr_adc.h"
 #include"light_ws2812_AVR/Light_WS2812/ws2812_config.h"
 #include"light_ws2812_AVR/Light_WS2812/light_ws2812.h"
-
+#include"main.h"
 
 #define STARTADC ADCSRA |= (1<<ADSC)
 #define PB_mic PB0
-
+#define NOISE 100
+#define SCALE_FACTOR 8
 //resolution fft calc: 
 //https://3roam.com/fft-resolution-bandwidth-calculator/
 //128 samples , 1kSPS  = 7.8Hz
@@ -29,63 +29,101 @@
 //6-	755
 //7-	880
 //8-	1kHz
+//
+const float log_scale = 64./log(64./SCALE_FACTOR + 1.);  
+
 int main (void)
 {
 		int i,i2;
 		int colorb;
 		int colora;
-		int avg;
-		char sample[128];
-		char im[128];
+		int sum,avg;
+		char sample[64];
+		char im[64];
+		char buff[64];
+		char temp;
 		struct cRGB led_bar1[8];
 		//DDRB = (1<<mic);//would be setting output, default is input so no need for setting
 		setupADC();
+		OSCCAL = 250;//overclock!!! to 30MHz
 		for(i=0;i<8;i++)
 		{
 				led_bar1[i].r=0;
 				led_bar1[i].g=0;
 				led_bar1[i].b=0;
 		}
-
-
+		for(i=0;i<64;i++)
+		{
+				buff[i]=0;
+		}
 		while(1)
 		{
-//######RECORD SAMPLES#######
-				for(i=0;i<128;i++)
+//######RECORD SAMPLES######
+				sum = 0;
+				for(i=0;i<64;i++)
 				{	
 
 						STARTADC; 
-						sample[i] = (ADCH-128)*2; //read Analog value register 8bit center -128
+						sample[i] = (ADCH-128); //read Analog value register 8bit center -128
+						//sample[i] = (sample[i] <= NOISE) ? 0 : (sample[i] - NOISE);						  //noise reduction
 						im[i]=0;		//pseudo data for funciton
+										//
+						sum+=sample[i];//dc-bias
 				}
-				fix_fft(sample,im,7,0);//im[i] is always zero
+				avg = sum/64;//calculate bias
+				for(i=0;i<64;i++)
+				{
+						sample[i]-=avg;//remove bias
+				}				
+				fix_fftr(sample,6,0);//im[i] is always zero
 //####Averaging Data####
 //
-			   for(i2=0;i2<128;i2++)
+				for(i=0;i<64;i++)
 				{	
 						
-						sample[i2] = sqrt(sample[i2] * sample[i2] + im[i2]* im[i2]);
+						sample[i] = sample[i] *SCALE_FACTOR;
+						sample[i] = (sample[i]*0.6 + buff[i]*0.5);
+						buff[i] = sample[i];	
+						if(sample[i]<0) sample[i] = 0;
 				}
-
 				for(i=0;i<8;i++)
 				{
-						for(i2=1;i2<=16;i2++)
+						for(i2=1;i2<=8;i2++)
 						{
-						sample[i] = (sample[i] + sample[i*16+i2])/2;
+								sample[i] = ((sample[i] + sample[i*8+i2])/2);
 						}
 						//avg written to sample[0..7]
 						//contains values scaled to int boundarys
 						//scale them to 0..256
-						sample[i]= map(sample[i],0,30,0,255);
-						led_bar1[i].r=0;;led_bar1[i].b=0;
-						//if(sample[i]<2) sample[i]=2;
-						led_bar1[i].g=sample[i];
 
+						
+						//sample[i]= map(sample[i],0,50,0,255);
+						
+
+
+						if(sample[i]<30)
+						{
+								led_bar1[i].r=0;
+								led_bar1[i].g=0;
+								led_bar1[i].b=sample[i];
+						}
+						else if(sample[i]<50)
+						{
+								led_bar1[i].r=0;
+								led_bar1[i].g=sample[i];
+								led_bar1[i].b=0;
+						}
+						else if(sample[i]<100)
+						{
+								led_bar1[i].r=sample[i];
+								led_bar1[i].g=0;
+								led_bar1[i].b=0;
+						}
 				}
 
 
 								
-				ws2812_setleds((uint8_t *)led_bar1,8);
+				ws2812_setleds(led_bar1,8);
 		}
 
 				//	_delay_ms(50);

makefile

@@ -28,7 +28,7 @@ DEBUG = stabs
 CSTANDARD = -std=gnu99
 
 # Place -D or -U options here
-CDEFS = -DF_CPU=16000000UL
+CDEFS = -DF_CPU=30000000UL
 
 # Place -I options here
 CINCS =