diff --git a/avr_adc.c b/avr_adc.c deleted file mode 100644 index d4e6213..0000000 --- a/avr_adc.c +++ /dev/null @@ -1,52 +0,0 @@ -//setup adc for an attiny85 -// -#include -#include"avr_adc.h" -#define _BS(bit) (1< -#include "fix_fft.h" - - -//#include depreacted - -/* fix_fft.c - Fixed-point in-place Fast Fourier Transform */ -/* - All data are fixed-point short integers, in which -32768 - to +32768 represent -1.0 to +1.0 respectively. Integer - arithmetic is used for speed, instead of the more natural - floating-point. - - For the forward FFT (time -> freq), fixed scaling is - performed to prevent arithmetic overflow, and to map a 0dB - sine/cosine wave (i.e. amplitude = 32767) to two -6dB freq - coefficients. The return value is always 0. - - For the inverse FFT (freq -> time), fixed scaling cannot be - done, as two 0dB coefficients would sum to a peak amplitude - of 64K, overflowing the 32k range of the fixed-point integers. - Thus, the fix_fft() routine performs variable scaling, and - returns a value which is the number of bits LEFT by which - the output must be shifted to get the actual amplitude - (i.e. if fix_fft() returns 3, each value of fr[] and fi[] - must be multiplied by 8 (2**3) for proper scaling. - Clearly, this cannot be done within fixed-point short - integers. In practice, if the result is to be used as a - filter, the scale_shift can usually be ignored, as the - result will be approximately correctly normalized as is. - - Written by: Tom Roberts 11/8/89 - Made portable: Malcolm Slaney 12/15/94 malcolm@interval.com - Enhanced: Dimitrios P. Bouras 14 Jun 2006 dbouras@ieee.org - Modified for 8bit values David Keller 10.10.2010 -*/ - - -#define N_WAVE 256 /* full length of Sinewave[] */ -#define LOG2_N_WAVE 8 /* log2(N_WAVE) */ - - - - -/* - Since we only use 3/4 of N_WAVE, we define only - this many samples, in order to conserve data space. -*/ - - -//typedef uint8_t PROGMEM prog_uint8_t; -const uint8_t Sinewave[N_WAVE-N_WAVE/4] PROGMEM = { -0, 3, 6, 9, 12, 15, 18, 21, -24, 28, 31, 34, 37, 40, 43, 46, -48, 51, 54, 57, 60, 63, 65, 68, -71, 73, 76, 78, 81, 83, 85, 88, -90, 92, 94, 96, 98, 100, 102, 104, -106, 108, 109, 111, 112, 114, 115, 117, -118, 119, 120, 121, 122, 123, 124, 124, -125, 126, 126, 127, 127, 127, 127, 127, - -127, 127, 127, 127, 127, 127, 126, 126, -125, 124, 124, 123, 122, 121, 120, 119, -118, 117, 115, 114, 112, 111, 109, 108, -106, 104, 102, 100, 98, 96, 94, 92, -90, 88, 85, 83, 81, 78, 76, 73, -71, 68, 65, 63, 60, 57, 54, 51, -48, 46, 43, 40, 37, 34, 31, 28, -24, 21, 18, 15, 12, 9, 6, 3, - -0, -3, -6, -9, -12, -15, -18, -21, --24, -28, -31, -34, -37, -40, -43, -46, --48, -51, -54, -57, -60, -63, -65, -68, --71, -73, -76, -78, -81, -83, -85, -88, --90, -92, -94, -96, -98, -100, -102, -104, --106, -108, -109, -111, -112, -114, -115, -117, --118, -119, -120, -121, -122, -123, -124, -124, --125, -126, -126, -127, -127, -127, -127, -127, - -/*-127, -127, -127, -127, -127, -127, -126, -126, --125, -124, -124, -123, -122, -121, -120, -119, --118, -117, -115, -114, -112, -111, -109, -108, --106, -104, -102, -100, -98, -96, -94, -92, --90, -88, -85, -83, -81, -78, -76, -73, --71, -68, -65, -63, -60, -57, -54, -51, --48, -46, -43, -40, -37, -34, -31, -28, --24, -21, -18, -15, -12, -9, -6, -3, */ -}; - - - - - - -/* - FIX_MPY() - fixed-point multiplication & scaling. - Substitute inline assembly for hardware-specific - optimization suited to a particluar DSP processor. - Scaling ensures that result remains 16-bit. -*/ -static inline char FIX_MPY(char a, char b) -{ - - //Serial.println(a); - //Serial.println(b); - - - /* shift right one less bit (i.e. 15-1) */ - int c = ((int)a * (int)b) >> 6; - /* last bit shifted out = rounding-bit */ - b = c & 0x01; - /* last shift + rounding bit */ - a = (c >> 1) + b; - - /* - Serial.println(Sinewave[3]); - Serial.println(c); - Serial.println(a); - while(1);*/ - - return a; -} - -/* - fix_fft() - perform forward/inverse fast Fourier transform. - fr[n],fi[n] are real and imaginary arrays, both INPUT AND - RESULT (in-place FFT), with 0 <= n < 2**m; set inverse to - 0 for forward transform (FFT), or 1 for iFFT. -*/ -int fix_fft(char fr[], char fi[], int m, int inverse) -{ - int mr, nn, i, j, l, k, istep, n, scale, shift; - char qr, qi, tr, ti, wr, wi; - - n = 1 << m; - - /* max FFT size = N_WAVE */ - if (n > N_WAVE) - return -1; - - mr = 0; - nn = n - 1; - scale = 0; - - /* decimation in time - re-order data */ - for (m=1; m<=nn; ++m) { - l = n; - do { - l >>= 1; - } while (mr+l > nn); - mr = (mr & (l-1)) + l; - - if (mr <= m) - continue; - tr = fr[m]; - fr[m] = fr[mr]; - fr[mr] = tr; - ti = fi[m]; - fi[m] = fi[mr]; - fi[mr] = ti; - } - - l = 1; - k = LOG2_N_WAVE-1; - while (l < n) { - if (inverse) { - /* variable scaling, depending upon data */ - shift = 0; - for (i=0; i 16383 || m > 16383) { - shift = 1; - break; - } - } - if (shift) - ++scale; - } else { - /* - fixed scaling, for proper normalization -- - there will be log2(n) passes, so this results - in an overall factor of 1/n, distributed to - maximize arithmetic accuracy. - */ - shift = 1; - } - /* - it may not be obvious, but the shift will be - performed on each data point exactly once, - during this pass. - */ - istep = l << 1; - for (m=0; m>= 1; - wi >>= 1; - } - for (i=m; i>= 1; - qi >>= 1; - } - fr[j] = qr - tr; - fi[j] = qi - ti; - fr[i] = qr + tr; - fi[i] = qi + ti; - } - } - --k; - l = istep; - } - return scale; -} - -/* - fix_fftr() - forward/inverse FFT on array of real numbers. - Real FFT/iFFT using half-size complex FFT by distributing - even/odd samples into real/imaginary arrays respectively. - In order to save data space (i.e. to avoid two arrays, one - for real, one for imaginary samples), we proceed in the - following two steps: a) samples are rearranged in the real - array so that all even samples are in places 0-(N/2-1) and - all imaginary samples in places (N/2)-(N-1), and b) fix_fft - is called with fr and fi pointing to index 0 and index N/2 - respectively in the original array. The above guarantees - that fix_fft "sees" consecutive real samples as alternating - real and imaginary samples in the complex array. -*/ -int fix_fftr(char f[], int m, int inverse) -{ - int i, N = 1<<(m-1), scale = 0; - char tt, *fr=f, *fi=&f[N]; - - if (inverse) - scale = fix_fft(fi, fr, m-1, inverse); - for (i=1; i //depreacted included in arduino.h - - - - -/* - fix_fft() - perform forward/inverse fast Fourier transform. - fr[n],fi[n] are real and imaginary arrays, both INPUT AND - RESULT (in-place FFT), with 0 <= n < 2**m; set inverse to - 0 for forward transform (FFT), or 1 for iFFT. -*/ -int fix_fft(char fr[], char fi[], int m, int inverse); - - - -/* - fix_fftr() - forward/inverse FFT on array of real numbers. - Real FFT/iFFT using half-size complex FFT by distributing - even/odd samples into real/imaginary arrays respectively. - In order to save data space (i.e. to avoid two arrays, one - for real, one for imaginary samples), we proceed in the - following two steps: a) samples are rearranged in the real - array so that all even samples are in places 0-(N/2-1) and - all imaginary samples in places (N/2)-(N-1), and b) fix_fft - is called with fr and fi pointing to index 0 and index N/2 - respectively in the original array. The above guarantees - that fix_fft "sees" consecutive real samples as alternating - real and imaginary samples in the complex array. -*/ -int fix_fftr(char f[], int m, int inverse); -static inline char FIX_MPY(char a,char b); - - - -#endif diff --git a/light_ws2812_AVR/Examples/Chained_writes.c b/light_ws2812_AVR/Examples/Chained_writes.c deleted file mode 100644 index 3a2ca72..0000000 --- a/light_ws2812_AVR/Examples/Chained_writes.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * ATTENTION: This example uses the old v1.0 interface. - * - * Light_WS2812 library example - Chained Writes - * - * This example shows how to use multiple calls without issuing a reset - * in between, allowing to send the same buffer to the string - * multiple times. This technique can be useful to conserve memory - * or to calculate LED colors on-the-fly. - * - * Please make sure to set your configuration in "WS2812_config.h" first - * - */ - -#include -#include -#include -#include "light_ws2812.h" - -struct cRGB led[2]; - -int main(void) -{ - - uint8_t pos=0; - uint8_t direction=1; - uint8_t i; - - #ifdef __AVR_ATtiny10__ - CCP=0xD8; // configuration change protection, write signature - CLKPSR=0; // set cpu clock prescaler =1 (8Mhz) (attiny 4/5/9/10) - #endif - - led[0].r=16;led[0].g=00;led[0].b=00; // LED 0 is red - led[1].r=16;led[1].g=16;led[1].b=16; // LED 1 is White - - while(1) - { - - for (i=0; i -#include -#include -#include "light_ws2812.h" - -struct cRGBW led[1]; - -int main(void) -{ - #ifdef __AVR_ATtiny10__ - CCP=0xD8; // configuration change protection, write signature - CLKPSR=0; // set cpu clock prescaler =1 (8Mhz) (attiny 4/5/9/10) - #endif - - while(1) - { - led[0].r=128;led[0].g=00;led[0].b=0;led[0].w=0; // Write red to array - ws2812_setleds_rgbw(led,1); - _delay_ms(500); // wait for 500ms. - - led[0].r=0;led[0].g=128;led[0].b=0;led[0].w=0; // green - ws2812_setleds_rgbw(led,1); - _delay_ms(500); - - led[0].r=0;led[0].g=0;led[0].b=128;led[0].w=0; // blue - ws2812_setleds_rgbw(led,1); - _delay_ms(500); - - led[0].r=0;led[0].g=0;led[0].b=0;led[0].w=128; // white - ws2812_setleds_rgbw(led,1); - _delay_ms(500); - - } -} diff --git a/light_ws2812_AVR/Examples/RGB_blinky.c b/light_ws2812_AVR/Examples/RGB_blinky.c deleted file mode 100644 index dfa92bb..0000000 --- a/light_ws2812_AVR/Examples/RGB_blinky.c +++ /dev/null @@ -1,38 +0,0 @@ -/* -* Light_WS2812 library example - RGB_blinky -* -* cycles one LED through red, green, blue -* -* This example is configured for a ATtiny85 with PLL clock fuse set and -* the WS2812 string connected to PB4. -*/ - -#include -#include -#include -#include "light_ws2812.h" - -struct cRGB led[1]; - -int main(void) -{ - #ifdef __AVR_ATtiny10__ - CCP=0xD8; // configuration change protection, write signature - CLKPSR=0; // set cpu clock prescaler =1 (8Mhz) (attiny 4/5/9/10) - #endif - - while(1) - { - led[0].r=255;led[0].g=00;led[0].b=0; // Write red to array - ws2812_setleds(led,1); - _delay_ms(500); // wait for 500ms. - - led[0].r=0;led[0].g=255;led[0].b=0; // green - ws2812_setleds(led,1); - _delay_ms(500); - - led[0].r=0;led[0].g=00;led[0].b=255; // blue - ws2812_setleds(led,1); - _delay_ms(500); - } -} diff --git a/light_ws2812_AVR/Examples/Rainbow.c b/light_ws2812_AVR/Examples/Rainbow.c deleted file mode 100644 index 0f52578..0000000 --- a/light_ws2812_AVR/Examples/Rainbow.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * - * This example is configured for a Atmega32 at 16MHz - */ - -#include -#include -#include -#include "light_ws2812.h" - -#define MAXPIX 30 -#define COLORLENGTH (MAXPIX/2) -#define FADE (256/COLORLENGTH) - -struct cRGB colors[8]; -struct cRGB led[MAXPIX]; - -int main(void) -{ - - uint8_t j = 1; - uint8_t k = 1; - - DDRB|=_BV(ws2812_pin); - - uint8_t i; - for(i=MAXPIX; i>0; i--) - { - led[i-1].r=0;led[i-1].g=0;led[i-1].b=0; - } - - //Rainbowcolors - colors[0].r=150; colors[0].g=150; colors[0].b=150; - colors[1].r=255; colors[1].g=000; colors[1].b=000;//red - colors[2].r=255; colors[2].g=100; colors[2].b=000;//orange - colors[3].r=100; colors[3].g=255; colors[3].b=000;//yellow - colors[4].r=000; colors[4].g=255; colors[4].b=000;//green - colors[5].r=000; colors[5].g=100; colors[5].b=255;//light blue (türkis) - colors[6].r=000; colors[6].g=000; colors[6].b=255;//blue - colors[7].r=100; colors[7].g=000; colors[7].b=255;//violet - - while(1) - { - //shift all vallues by one led - uint8_t i=0; - for(i=MAXPIX; i>1; i--) - led[i-1]=led[i-2]; - //change colour when colourlength is reached - if(k>COLORLENGTH) - { - j++; - if(j>7) - { - j=0; - } - - k=0; - } - k++; - //loop colouers - - //fade red - if(led[0].r<(colors[j].r-FADE)) - led[0].r+=FADE; - - if(led[0].r>(colors[j].r+FADE)) - led[0].r-=FADE; - - if(led[0].g<(colors[j].g-FADE)) - led[0].g+=FADE; - - if(led[0].g>(colors[j].g+FADE)) - led[0].g-=FADE; - - if(led[0].b<(colors[j].b-FADE)) - led[0].b+=FADE; - - if(led[0].b>(colors[j].b+FADE)) - led[0].b-=FADE; - - _delay_ms(10); - ws2812_sendarray((uint8_t *)led,MAXPIX*3); - } -} diff --git a/light_ws2812_AVR/License.txt b/light_ws2812_AVR/License.txt deleted file mode 100644 index 52fdf25..0000000 --- a/light_ws2812_AVR/License.txt +++ /dev/null @@ -1,676 +0,0 @@ - - - GNU GENERAL PUBLIC LICENSE - Version 3, 29 June 2007 - - Copyright (C) 2007 Free Software Foundation, Inc. - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The GNU General Public License is a free, copyleft license for -software and other kinds of works. - - The licenses for most software and other practical works are designed -to take away your freedom to share and change the works. By contrast, -the GNU General Public License is intended to guarantee your freedom to -share and change all versions of a program--to make sure it remains free -software for all its users. We, the Free Software Foundation, use the -GNU General Public License for most of our software; it applies also to -any other work released this way by its authors. You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -them if you wish), that you receive source code or can get it if you -want it, that you can change the software or use pieces of it in new -free programs, and that you know you can do these things. - - To protect your rights, we need to prevent others from denying you -these rights or asking you to surrender the rights. Therefore, you have -certain responsibilities if you distribute copies of the software, or if -you modify it: responsibilities to respect the freedom of others. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must pass on to the recipients the same -freedoms that you received. You must make sure that they, too, receive -or can get the source code. And you must show them these terms so they -know their rights. - - Developers that use the GNU GPL protect your rights with two steps: -(1) assert copyright on the software, and (2) offer you this License -giving you legal permission to copy, distribute and/or modify it. - - For the developers' and authors' protection, the GPL clearly explains -that there is no warranty for this free software. For both users' and -authors' sake, the GPL requires that modified versions be marked as -changed, so that their problems will not be attributed erroneously to -authors of previous versions. - - Some devices are designed to deny users access to install or run -modified versions of the software inside them, although the manufacturer -can do so. This is fundamentally incompatible with the aim of -protecting users' freedom to change the software. The systematic -pattern of such abuse occurs in the area of products for individuals to -use, which is precisely where it is most unacceptable. Therefore, we -have designed this version of the GPL to prohibit the practice for those -products. If such problems arise substantially in other domains, we -stand ready to extend this provision to those domains in future versions -of the GPL, as needed to protect the freedom of users. - - Finally, every program is threatened constantly by software patents. -States should not allow patents to restrict development and use of -software on general-purpose computers, but in those that do, we wish to -avoid the special danger that patents applied to a free program could -make it effectively proprietary. To prevent this, the GPL assures that -patents cannot be used to render the program non-free. - - The precise terms and conditions for copying, distribution and -modification follow. - - TERMS AND CONDITIONS - - 0. Definitions. - - "This License" refers to version 3 of the GNU General Public License. - - "Copyright" also means copyright-like laws that apply to other kinds of -works, such as semiconductor masks. - - "The Program" refers to any copyrightable work licensed under this -License. Each licensee is addressed as "you". "Licensees" and -"recipients" may be individuals or organizations. - - To "modify" a work means to copy from or adapt all or part of the work -in a fashion requiring copyright permission, other than the making of an -exact copy. The resulting work is called a "modified version" of the -earlier work or a work "based on" the earlier work. - - A "covered work" means either the unmodified Program or a work based -on the Program. - - To "propagate" a work means to do anything with it that, without -permission, would make you directly or secondarily liable for -infringement under applicable copyright law, except executing it on a -computer or modifying a private copy. Propagation includes copying, -distribution (with or without modification), making available to the -public, and in some countries other activities as well. - - To "convey" a work means any kind of propagation that enables other -parties to make or receive copies. Mere interaction with a user through -a computer network, with no transfer of a copy, is not conveying. - - An interactive user interface displays "Appropriate Legal Notices" -to the extent that it includes a convenient and prominently visible -feature that (1) displays an appropriate copyright notice, and (2) -tells the user that there is no warranty for the work (except to the -extent that warranties are provided), that licensees may convey the -work under this License, and how to view a copy of this License. If -the interface presents a list of user commands or options, such as a -menu, a prominent item in the list meets this criterion. - - 1. Source Code. - - The "source code" for a work means the preferred form of the work -for making modifications to it. "Object code" means any non-source -form of a work. - - A "Standard Interface" means an interface that either is an official -standard defined by a recognized standards body, or, in the case of -interfaces specified for a particular programming language, one that -is widely used among developers working in that language. - - The "System Libraries" of an executable work include anything, other -than the work as a whole, that (a) is included in the normal form of -packaging a Major Component, but which is not part of that Major -Component, and (b) serves only to enable use of the work with that -Major Component, or to implement a Standard Interface for which an -implementation is available to the public in source code form. A -"Major Component", in this context, means a major essential component -(kernel, window system, and so on) of the specific operating system -(if any) on which the executable work runs, or a compiler used to -produce the work, or an object code interpreter used to run it. - - The "Corresponding Source" for a work in object code form means all -the source code needed to generate, install, and (for an executable -work) run the object code and to modify the work, including scripts to -control those activities. However, it does not include the work's -System Libraries, or general-purpose tools or generally available free -programs which are used unmodified in performing those activities but -which are not part of the work. For example, Corresponding Source -includes interface definition files associated with source files for -the work, and the source code for shared libraries and dynamically -linked subprograms that the work is specifically designed to require, -such as by intimate data communication or control flow between those -subprograms and other parts of the work. - - The Corresponding Source need not include anything that users -can regenerate automatically from other parts of the Corresponding -Source. - - The Corresponding Source for a work in source code form is that -same work. - - 2. Basic Permissions. - - All rights granted under this License are granted for the term of -copyright on the Program, and are irrevocable provided the stated -conditions are met. This License explicitly affirms your unlimited -permission to run the unmodified Program. The output from running a -covered work is covered by this License only if the output, given its -content, constitutes a covered work. This License acknowledges your -rights of fair use or other equivalent, as provided by copyright law. - - You may make, run and propagate covered works that you do not -convey, without conditions so long as your license otherwise remains -in force. You may convey covered works to others for the sole purpose -of having them make modifications exclusively for you, or provide you -with facilities for running those works, provided that you comply with -the terms of this License in conveying all material for which you do -not control copyright. Those thus making or running the covered works -for you must do so exclusively on your behalf, under your direction -and control, on terms that prohibit them from making any copies of -your copyrighted material outside their relationship with you. - - Conveying under any other circumstances is permitted solely under -the conditions stated below. Sublicensing is not allowed; section 10 -makes it unnecessary. - - 3. Protecting Users' Legal Rights From Anti-Circumvention Law. - - No covered work shall be deemed part of an effective technological -measure under any applicable law fulfilling obligations under article -11 of the WIPO copyright treaty adopted on 20 December 1996, or -similar laws prohibiting or restricting circumvention of such -measures. - - When you convey a covered work, you waive any legal power to forbid -circumvention of technological measures to the extent such circumvention -is effected by exercising rights under this License with respect to -the covered work, and you disclaim any intention to limit operation or -modification of the work as a means of enforcing, against the work's -users, your or third parties' legal rights to forbid circumvention of -technological measures. - - 4. Conveying Verbatim Copies. - - You may convey verbatim copies of the Program's source code as you -receive it, in any medium, provided that you conspicuously and -appropriately publish on each copy an appropriate copyright notice; -keep intact all notices stating that this License and any -non-permissive terms added in accord with section 7 apply to the code; -keep intact all notices of the absence of any warranty; and give all -recipients a copy of this License along with the Program. - - You may charge any price or no price for each copy that you convey, -and you may offer support or warranty protection for a fee. - - 5. Conveying Modified Source Versions. - - You may convey a work based on the Program, or the modifications to -produce it from the Program, in the form of source code under the -terms of section 4, provided that you also meet all of these conditions: - - a) The work must carry prominent notices stating that you modified - it, and giving a relevant date. - - b) The work must carry prominent notices stating that it is - released under this License and any conditions added under section - 7. This requirement modifies the requirement in section 4 to - "keep intact all notices". - - c) You must license the entire work, as a whole, under this - License to anyone who comes into possession of a copy. This - License will therefore apply, along with any applicable section 7 - additional terms, to the whole of the work, and all its parts, - regardless of how they are packaged. This License gives no - permission to license the work in any other way, but it does not - invalidate such permission if you have separately received it. - - d) If the work has interactive user interfaces, each must display - Appropriate Legal Notices; however, if the Program has interactive - interfaces that do not display Appropriate Legal Notices, your - work need not make them do so. - - A compilation of a covered work with other separate and independent -works, which are not by their nature extensions of the covered work, -and which are not combined with it such as to form a larger program, -in or on a volume of a storage or distribution medium, is called an -"aggregate" if the compilation and its resulting copyright are not -used to limit the access or legal rights of the compilation's users -beyond what the individual works permit. Inclusion of a covered work -in an aggregate does not cause this License to apply to the other -parts of the aggregate. - - 6. Conveying Non-Source Forms. - - You may convey a covered work in object code form under the terms -of sections 4 and 5, provided that you also convey the -machine-readable Corresponding Source under the terms of this License, -in one of these ways: - - a) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by the - Corresponding Source fixed on a durable physical medium - customarily used for software interchange. - - b) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by a - written offer, valid for at least three years and valid for as - long as you offer spare parts or customer support for that product - model, to give anyone who possesses the object code either (1) a - copy of the Corresponding Source for all the software in the - product that is covered by this License, on a durable physical - medium customarily used for software interchange, for a price no - more than your reasonable cost of physically performing this - conveying of source, or (2) access to copy the - Corresponding Source from a network server at no charge. - - c) Convey individual copies of the object code with a copy of the - written offer to provide the Corresponding Source. This - alternative is allowed only occasionally and noncommercially, and - only if you received the object code with such an offer, in accord - with subsection 6b. - - d) Convey the object code by offering access from a designated - place (gratis or for a charge), and offer equivalent access to the - Corresponding Source in the same way through the same place at no - further charge. You need not require recipients to copy the - Corresponding Source along with the object code. If the place to - copy the object code is a network server, the Corresponding Source - may be on a different server (operated by you or a third party) - that supports equivalent copying facilities, provided you maintain - clear directions next to the object code saying where to find the - Corresponding Source. Regardless of what server hosts the - Corresponding Source, you remain obligated to ensure that it is - available for as long as needed to satisfy these requirements. - - e) Convey the object code using peer-to-peer transmission, provided - you inform other peers where the object code and Corresponding - Source of the work are being offered to the general public at no - charge under subsection 6d. - - A separable portion of the object code, whose source code is excluded -from the Corresponding Source as a System Library, need not be -included in conveying the object code work. - - A "User Product" is either (1) a "consumer product", which means any -tangible personal property which is normally used for personal, family, -or household purposes, or (2) anything designed or sold for incorporation -into a dwelling. In determining whether a product is a consumer product, -doubtful cases shall be resolved in favor of coverage. For a particular -product received by a particular user, "normally used" refers to a -typical or common use of that class of product, regardless of the status -of the particular user or of the way in which the particular user -actually uses, or expects or is expected to use, the product. A product -is a consumer product regardless of whether the product has substantial -commercial, industrial or non-consumer uses, unless such uses represent -the only significant mode of use of the product. - - "Installation Information" for a User Product means any methods, -procedures, authorization keys, or other information required to install -and execute modified versions of a covered work in that User Product from -a modified version of its Corresponding Source. The information must -suffice to ensure that the continued functioning of the modified object -code is in no case prevented or interfered with solely because -modification has been made. - - If you convey an object code work under this section in, or with, or -specifically for use in, a User Product, and the conveying occurs as -part of a transaction in which the right of possession and use of the -User Product is transferred to the recipient in perpetuity or for a -fixed term (regardless of how the transaction is characterized), the -Corresponding Source conveyed under this section must be accompanied -by the Installation Information. But this requirement does not apply -if neither you nor any third party retains the ability to install -modified object code on the User Product (for example, the work has -been installed in ROM). - - The requirement to provide Installation Information does not include a -requirement to continue to provide support service, warranty, or updates -for a work that has been modified or installed by the recipient, or for -the User Product in which it has been modified or installed. Access to a -network may be denied when the modification itself materially and -adversely affects the operation of the network or violates the rules and -protocols for communication across the network. - - Corresponding Source conveyed, and Installation Information provided, -in accord with this section must be in a format that is publicly -documented (and with an implementation available to the public in -source code form), and must require no special password or key for -unpacking, reading or copying. - - 7. Additional Terms. - - "Additional permissions" are terms that supplement the terms of this -License by making exceptions from one or more of its conditions. -Additional permissions that are applicable to the entire Program shall -be treated as though they were included in this License, to the extent -that they are valid under applicable law. If additional permissions -apply only to part of the Program, that part may be used separately -under those permissions, but the entire Program remains governed by -this License without regard to the additional permissions. - - When you convey a copy of a covered work, you may at your option -remove any additional permissions from that copy, or from any part of -it. (Additional permissions may be written to require their own -removal in certain cases when you modify the work.) You may place -additional permissions on material, added by you to a covered work, -for which you have or can give appropriate copyright permission. - - Notwithstanding any other provision of this License, for material you -add to a covered work, you may (if authorized by the copyright holders of -that material) supplement the terms of this License with terms: - - a) Disclaiming warranty or limiting liability differently from the - terms of sections 15 and 16 of this License; or - - b) Requiring preservation of specified reasonable legal notices or - author attributions in that material or in the Appropriate Legal - Notices displayed by works containing it; or - - c) Prohibiting misrepresentation of the origin of that material, or - requiring that modified versions of such material be marked in - reasonable ways as different from the original version; or - - d) Limiting the use for publicity purposes of names of licensors or - authors of the material; or - - e) Declining to grant rights under trademark law for use of some - trade names, trademarks, or service marks; or - - f) Requiring indemnification of licensors and authors of that - material by anyone who conveys the material (or modified versions of - it) with contractual assumptions of liability to the recipient, for - any liability that these contractual assumptions directly impose on - those licensors and authors. - - All other non-permissive additional terms are considered "further -restrictions" within the meaning of section 10. If the Program as you -received it, or any part of it, contains a notice stating that it is -governed by this License along with a term that is a further -restriction, you may remove that term. If a license document contains -a further restriction but permits relicensing or conveying under this -License, you may add to a covered work material governed by the terms -of that license document, provided that the further restriction does -not survive such relicensing or conveying. - - If you add terms to a covered work in accord with this section, you -must place, in the relevant source files, a statement of the -additional terms that apply to those files, or a notice indicating -where to find the applicable terms. - - Additional terms, permissive or non-permissive, may be stated in the -form of a separately written license, or stated as exceptions; -the above requirements apply either way. - - 8. Termination. - - You may not propagate or modify a covered work except as expressly -provided under this License. Any attempt otherwise to propagate or -modify it is void, and will automatically terminate your rights under -this License (including any patent licenses granted under the third -paragraph of section 11). - - However, if you cease all violation of this License, then your -license from a particular copyright holder is reinstated (a) -provisionally, unless and until the copyright holder explicitly and -finally terminates your license, and (b) permanently, if the copyright -holder fails to notify you of the violation by some reasonable means -prior to 60 days after the cessation. - - Moreover, your license from a particular copyright holder is -reinstated permanently if the copyright holder notifies you of the -violation by some reasonable means, this is the first time you have -received notice of violation of this License (for any work) from that -copyright holder, and you cure the violation prior to 30 days after -your receipt of the notice. - - Termination of your rights under this section does not terminate the -licenses of parties who have received copies or rights from you under -this License. If your rights have been terminated and not permanently -reinstated, you do not qualify to receive new licenses for the same -material under section 10. - - 9. Acceptance Not Required for Having Copies. - - You are not required to accept this License in order to receive or -run a copy of the Program. Ancillary propagation of a covered work -occurring solely as a consequence of using peer-to-peer transmission -to receive a copy likewise does not require acceptance. However, -nothing other than this License grants you permission to propagate or -modify any covered work. These actions infringe copyright if you do -not accept this License. Therefore, by modifying or propagating a -covered work, you indicate your acceptance of this License to do so. - - 10. Automatic Licensing of Downstream Recipients. - - Each time you convey a covered work, the recipient automatically -receives a license from the original licensors, to run, modify and -propagate that work, subject to this License. You are not responsible -for enforcing compliance by third parties with this License. - - An "entity transaction" is a transaction transferring control of an -organization, or substantially all assets of one, or subdividing an -organization, or merging organizations. If propagation of a covered -work results from an entity transaction, each party to that -transaction who receives a copy of the work also receives whatever -licenses to the work the party's predecessor in interest had or could -give under the previous paragraph, plus a right to possession of the -Corresponding Source of the work from the predecessor in interest, if -the predecessor has it or can get it with reasonable efforts. - - You may not impose any further restrictions on the exercise of the -rights granted or affirmed under this License. For example, you may -not impose a license fee, royalty, or other charge for exercise of -rights granted under this License, and you may not initiate litigation -(including a cross-claim or counterclaim in a lawsuit) alleging that -any patent claim is infringed by making, using, selling, offering for -sale, or importing the Program or any portion of it. - - 11. Patents. - - A "contributor" is a copyright holder who authorizes use under this -License of the Program or a work on which the Program is based. The -work thus licensed is called the contributor's "contributor version". - - A contributor's "essential patent claims" are all patent claims -owned or controlled by the contributor, whether already acquired or -hereafter acquired, that would be infringed by some manner, permitted -by this License, of making, using, or selling its contributor version, -but do not include claims that would be infringed only as a -consequence of further modification of the contributor version. For -purposes of this definition, "control" includes the right to grant -patent sublicenses in a manner consistent with the requirements of -this License. - - Each contributor grants you a non-exclusive, worldwide, royalty-free -patent license under the contributor's essential patent claims, to -make, use, sell, offer for sale, import and otherwise run, modify and -propagate the contents of its contributor version. - - In the following three paragraphs, a "patent license" is any express -agreement or commitment, however denominated, not to enforce a patent -(such as an express permission to practice a patent or covenant not to -sue for patent infringement). To "grant" such a patent license to a -party means to make such an agreement or commitment not to enforce a -patent against the party. - - If you convey a covered work, knowingly relying on a patent license, -and the Corresponding Source of the work is not available for anyone -to copy, free of charge and under the terms of this License, through a -publicly available network server or other readily accessible means, -then you must either (1) cause the Corresponding Source to be so -available, or (2) arrange to deprive yourself of the benefit of the -patent license for this particular work, or (3) arrange, in a manner -consistent with the requirements of this License, to extend the patent -license to downstream recipients. "Knowingly relying" means you have -actual knowledge that, but for the patent license, your conveying the -covered work in a country, or your recipient's use of the covered work -in a country, would infringe one or more identifiable patents in that -country that you have reason to believe are valid. - - If, pursuant to or in connection with a single transaction or -arrangement, you convey, or propagate by procuring conveyance of, a -covered work, and grant a patent license to some of the parties -receiving the covered work authorizing them to use, propagate, modify -or convey a specific copy of the covered work, then the patent license -you grant is automatically extended to all recipients of the covered -work and works based on it. - - A patent license is "discriminatory" if it does not include within -the scope of its coverage, prohibits the exercise of, or is -conditioned on the non-exercise of one or more of the rights that are -specifically granted under this License. You may not convey a covered -work if you are a party to an arrangement with a third party that is -in the business of distributing software, under which you make payment -to the third party based on the extent of your activity of conveying -the work, and under which the third party grants, to any of the -parties who would receive the covered work from you, a discriminatory -patent license (a) in connection with copies of the covered work -conveyed by you (or copies made from those copies), or (b) primarily -for and in connection with specific products or compilations that -contain the covered work, unless you entered into that arrangement, -or that patent license was granted, prior to 28 March 2007. - - Nothing in this License shall be construed as excluding or limiting -any implied license or other defenses to infringement that may -otherwise be available to you under applicable patent law. - - 12. No Surrender of Others' Freedom. - - If conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot convey a -covered work so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you may -not convey it at all. For example, if you agree to terms that obligate you -to collect a royalty for further conveying from those to whom you convey -the Program, the only way you could satisfy both those terms and this -License would be to refrain entirely from conveying the Program. - - 13. Use with the GNU Affero General Public License. - - Notwithstanding any other provision of this License, you have -permission to link or combine any covered work with a work licensed -under version 3 of the GNU Affero General Public License into a single -combined work, and to convey the resulting work. The terms of this -License will continue to apply to the part which is the covered work, -but the special requirements of the GNU Affero General Public License, -section 13, concerning interaction through a network will apply to the -combination as such. - - 14. Revised Versions of this License. - - The Free Software Foundation may publish revised and/or new versions of -the GNU General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - - Each version is given a distinguishing version number. If the -Program specifies that a certain numbered version of the GNU General -Public License "or any later version" applies to it, you have the -option of following the terms and conditions either of that numbered -version or of any later version published by the Free Software -Foundation. If the Program does not specify a version number of the -GNU General Public License, you may choose any version ever published -by the Free Software Foundation. - - If the Program specifies that a proxy can decide which future -versions of the GNU General Public License can be used, that proxy's -public statement of acceptance of a version permanently authorizes you -to choose that version for the Program. - - Later license versions may give you additional or different -permissions. However, no additional obligations are imposed on any -author or copyright holder as a result of your choosing to follow a -later version. - - 15. Disclaimer of Warranty. - - THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY -APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT -HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY -OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, -THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM -IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF -ALL NECESSARY SERVICING, REPAIR OR CORRECTION. - - 16. Limitation of Liability. - - IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS -THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY -GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE -USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF -DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD -PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), -EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF -SUCH DAMAGES. - - 17. Interpretation of Sections 15 and 16. - - If the disclaimer of warranty and limitation of liability provided -above cannot be given local legal effect according to their terms, -reviewing courts shall apply local law that most closely approximates -an absolute waiver of all civil liability in connection with the -Program, unless a warranty or assumption of liability accompanies a -copy of the Program in return for a fee. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -state the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - {one line to give the program's name and a brief idea of what it does.} - Copyright (C) {year} {name of author} - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . - -Also add information on how to contact you by electronic and paper mail. - - If the program does terminal interaction, make it output a short -notice like this when it starts in an interactive mode: - - {project} Copyright (C) {year} {fullname} - This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, your program's commands -might be different; for a GUI interface, you would use an "about box". - - You should also get your employer (if you work as a programmer) or school, -if any, to sign a "copyright disclaimer" for the program, if necessary. -For more information on this, and how to apply and follow the GNU GPL, see -. - - The GNU General Public License does not permit incorporating your program -into proprietary programs. If your program is a subroutine library, you -may consider it more useful to permit linking proprietary applications with -the library. If this is what you want to do, use the GNU Lesser General -Public License instead of this License. But first, please read -. diff --git a/light_ws2812_AVR/Light_WS2812/light_ws2812.c b/light_ws2812_AVR/Light_WS2812/light_ws2812.c deleted file mode 100644 index d05bc3a..0000000 --- a/light_ws2812_AVR/Light_WS2812/light_ws2812.c +++ /dev/null @@ -1,218 +0,0 @@ -/* -* light weight WS2812 lib V2.5b -* -* Controls WS2811/WS2812/WS2812B RGB-LEDs -* Author: Tim (cpldcpu@gmail.com) -* -* Jan 18th, 2014 v2.0b Initial Version -* Nov 29th, 2015 v2.3 Added SK6812RGBW support -* Nov 11th, 2023 v2.5 Added support for ports that cannot be addressed with "out" -* Added LGT8F88A support -* -* License: GNU GPL v2+ (see License.txt) -*/ - -#include "light_ws2812.h" -#include -#include -#include - -// Normally ws2812_sendarray_mask() runs under disabled-interrupt condition, -// undefine if you want to accept interrupts in that function. -#define interrupt_is_disabled - -// Setleds for standard RGB -void inline ws2812_setleds(struct cRGB *ledarray, uint16_t leds) -{ - ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin)); -} - -void inline ws2812_setleds_pin(struct cRGB *ledarray, uint16_t leds, uint8_t pinmask) -{ - ws2812_sendarray_mask((uint8_t*)ledarray,leds+leds+leds,pinmask); - _delay_us(ws2812_resettime); -} - -// Setleds for SK6812RGBW -void inline ws2812_setleds_rgbw(struct cRGBW *ledarray, uint16_t leds) -{ - ws2812_sendarray_mask((uint8_t*)ledarray,leds<<2,_BV(ws2812_pin)); - _delay_us(ws2812_resettime); -} - -void ws2812_sendarray(uint8_t *data,uint16_t datlen) -{ - ws2812_sendarray_mask(data,datlen,_BV(ws2812_pin)); -} - -/* - This routine writes an array of bytes with RGB values to the Dataout pin - using the fast 800kHz clockless WS2811/2812 protocol. -*/ - -// Timing in ns -#define w_zeropulse 350 -#define w_onepulse 900 -#define w_totalperiod 1250 - -// Fixed cycles used by the inner loop -#if defined(__LGT8F__) -#define w_fixedlow 4 -#define w_fixedhigh 6 -#define w_fixedtotal 10 -#else -#define w_fixedlow 3 -#define w_fixedhigh 6 -#define w_fixedtotal 10 -#endif - -// // Fixed cycles used by the inner loop -// #define w_fixedlow 2 -// #define w_fixedhigh 4 -// #define w_fixedtotal 8 - -// Insert NOPs to match the timing, if possible -#define w_zerocycles (((F_CPU/1000)*w_zeropulse )/1000000) -#define w_onecycles (((F_CPU/1000)*w_onepulse +500000)/1000000) -#define w_totalcycles (((F_CPU/1000)*w_totalperiod +500000)/1000000) - -// w1 - nops between rising edge and falling edge - low -#define w1 (w_zerocycles-w_fixedlow) -// w2 nops between fe low and fe high -#define w2 (w_onecycles-w_fixedhigh-w1) -// w3 nops to complete loop -#define w3 (w_totalcycles-w_fixedtotal-w1-w2) - -#if w1>0 - #define w1_nops w1 -#else - #define w1_nops 0 -#endif - -// The only critical timing parameter is the minimum pulse length of the "0" -// Warn or throw error if this timing can not be met with current F_CPU settings. -#define w_lowtime ((w1_nops+w_fixedlow)*1000000)/(F_CPU/1000) -#if w_lowtime>550 - #error "Light_ws2812: Sorry, the clock speed is too low. Did you set F_CPU correctly?" -#elif w_lowtime>450 - #warning "Light_ws2812: The timing is critical and may only work on WS2812B, not on WS2812(S)." - #warning "Please consider a higher clockspeed, if possible" -#endif - -#if w2>0 -#define w2_nops w2 -#else -#define w2_nops 0 -#endif - -#if w3>0 -#define w3_nops w3 -#else -#define w3_nops 0 -#endif - -#define w_nop1 "nop \n\t" -#ifdef interrupt_is_disabled -#define w_nop2 "brid .+0 \n\t" -#else -#define w_nop2 "brtc .+0 \n\t" -#endif -#define w_nop4 w_nop2 w_nop2 -#define w_nop8 w_nop4 w_nop4 -#define w_nop16 w_nop8 w_nop8 - -void inline ws2812_sendarray_mask(uint8_t *data,uint16_t datlen,uint8_t maskhi) -{ - uint8_t curbyte,ctr,masklo; - uint8_t sreg_prev; - uint8_t *port = (uint8_t*) _SFR_MEM_ADDR(ws2812_PORTREG); - - ws2812_DDRREG |= maskhi; // Enable output - - masklo =~maskhi&ws2812_PORTREG; - maskhi |= ws2812_PORTREG; - - sreg_prev=SREG; -#ifdef interrupt_is_disabled - cli(); -#endif - - while (datlen--) { - curbyte=*data++; - - asm volatile( - " ldi %0,8 \n\t" -#ifndef interrupt_is_disabled - " clt \n\t" -#endif - "loop%=: \n\t" - " st X,%3 \n\t" // '1' [02] '0' [02] - re - -#if (w1_nops&1) -w_nop1 -#endif -#if (w1_nops&2) -w_nop2 -#endif -#if (w1_nops&4) -w_nop4 -#endif -#if (w1_nops&8) -w_nop8 -#endif -#if (w1_nops&16) -w_nop16 -#endif -#if defined(__LGT8F__) - " bst %1,7 \n\t" // '1' [02] '0' [02] - " brts 1f \n\t" // '1' [04] '0' [03] - " st X,%4 \n\t" // '1' [--] '0' [04] - fe-low - "1: lsl %1 \n\t" // '1' [05] '0' [05] -#else - " sbrs %1,7 \n\t" // '1' [04] '0' [03] - " st X,%4 \n\t" // '1' [--] '0' [05] - fe-low - " lsl %1 \n\t" // '1' [05] '0' [06] -#endif -#if (w2_nops&1) - w_nop1 -#endif -#if (w2_nops&2) - w_nop2 -#endif -#if (w2_nops&4) - w_nop4 -#endif -#if (w2_nops&8) - w_nop8 -#endif -#if (w2_nops&16) - w_nop16 -#endif - " brcc skipone%= \n\t" // '1' [+1] '0' [+2] - - " st X,%4 \n\t" // '1' [+3] '0' [--] - fe-high - "skipone%=: " // '1' [+3] '0' [+2] - -#if (w3_nops&1) -w_nop1 -#endif -#if (w3_nops&2) -w_nop2 -#endif -#if (w3_nops&4) -w_nop4 -#endif -#if (w3_nops&8) -w_nop8 -#endif -#if (w3_nops&16) -w_nop16 -#endif - - " dec %0 \n\t" // '1' [+4] '0' [+3] - " brne loop%=\n\t" // '1' [+5] '0' [+4] - : "=&d" (ctr) - : "r" (curbyte), "x" (port), "r" (maskhi), "r" (masklo) - ); - } - - SREG=sreg_prev; -} diff --git a/light_ws2812_AVR/Light_WS2812/light_ws2812.h b/light_ws2812_AVR/Light_WS2812/light_ws2812.h deleted file mode 100644 index 91388c1..0000000 --- a/light_ws2812_AVR/Light_WS2812/light_ws2812.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - * light weight WS2812 lib include - * - * Version 2.3 - Nev 29th 2015 - * Author: Tim (cpldcpu@gmail.com) - * - * Please do not change this file! All configuration is handled in "ws2812_config.h" - * - * License: GNU GPL v2+ (see License.txt) - + - */ - -#ifndef LIGHT_WS2812_H_ -#define LIGHT_WS2812_H_ - -#include "ws2812_config.h" -#include -#include - -/////////////////////////////////////////////////////////////////////// -// Define Reset time in µs. -// -// This is the time the library spends waiting after writing the data. -// -// WS2813 needs 300 µs reset time -// WS2812 and clones only need 50 µs -// -/////////////////////////////////////////////////////////////////////// -#if !defined(ws2812_resettime) -#define ws2812_resettime 300 -#endif - -/////////////////////////////////////////////////////////////////////// -// Define I/O pin -/////////////////////////////////////////////////////////////////////// -#if !defined(ws2812_port) -#define ws2812_port B // Data port -#endif - -#if !defined(ws2812_pin) -#define ws2812_pin 0 // Data out pin -#endif - -/* - * Structure of the LED array - * - * cRGB: RGB for WS2812S/B/C/D, SK6812, SK6812Mini, SK6812WWA, APA104, APA106 - * cRGBW: RGBW for SK6812RGBW - */ - -struct cRGB { uint8_t g; uint8_t r; uint8_t b; }; -struct cRGBW { uint8_t g; uint8_t r; uint8_t b; uint8_t w;}; - - - -/* User Interface - * - * Input: - * ledarray: An array of GRB data describing the LED colors - * number_of_leds: The number of LEDs to write - * pinmask (optional): Bitmask describing the output bin. e.g. _BV(PB0) - * - * The functions will perform the following actions: - * - Set the data-out pin as output - * - Send out the LED data - * - Wait 50µs to reset the LEDs - */ - -void ws2812_setleds (struct cRGB *ledarray, uint16_t number_of_leds); -void ws2812_setleds_pin (struct cRGB *ledarray, uint16_t number_of_leds,uint8_t pinmask); -void ws2812_setleds_rgbw(struct cRGBW *ledarray, uint16_t number_of_leds); - -/* - * Old interface / Internal functions - * - * The functions take a byte-array and send to the data output as WS2812 bitstream. - * The length is the number of bytes to send - three per LED. - */ - -void ws2812_sendarray (uint8_t *array,uint16_t length); -void ws2812_sendarray_mask(uint8_t *array,uint16_t length, uint8_t pinmask); - - -/* - * Internal defines - */ -#if !defined(CONCAT) -#define CONCAT(a, b) a ## b -#endif - -#if !defined(CONCAT_EXP) -#define CONCAT_EXP(a, b) CONCAT(a, b) -#endif - -#define ws2812_PORTREG CONCAT_EXP(PORT,ws2812_port) -#define ws2812_DDRREG CONCAT_EXP(DDR,ws2812_port) - -#endif /* LIGHT_WS2812_H_ */ diff --git a/light_ws2812_AVR/Light_WS2812/light_ws2812.o b/light_ws2812_AVR/Light_WS2812/light_ws2812.o deleted file mode 100644 index bb060e7..0000000 Binary files a/light_ws2812_AVR/Light_WS2812/light_ws2812.o and /dev/null differ diff --git a/light_ws2812_AVR/Light_WS2812/ws2812_config.h b/light_ws2812_AVR/Light_WS2812/ws2812_config.h deleted file mode 100644 index 0622e37..0000000 --- a/light_ws2812_AVR/Light_WS2812/ws2812_config.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * light_ws2812_config.h - * - * v2.4 - Nov 27, 2016 - * - * User Configuration file for the light_ws2812_lib - * - */ - - -#ifndef WS2812_CONFIG_H_ -#define WS2812_CONFIG_H_ - -/////////////////////////////////////////////////////////////////////// -// Define Reset time in µs. -// -// This is the time the library spends waiting after writing the data. -// -// WS2813 needs 300 µs reset time -// WS2812 and clones only need 50 µs -// -/////////////////////////////////////////////////////////////////////// - -#define ws2812_resettime 300 - -/////////////////////////////////////////////////////////////////////// -// Define I/O pin -/////////////////////////////////////////////////////////////////////// - - -#define ws2812_port B // Data port -#define ws2812_pin 4 // Data out pin - -#endif /* WS2812_CONFIG_H_ */ diff --git a/light_ws2812_AVR/Makefile b/light_ws2812_AVR/Makefile deleted file mode 100644 index 9444b0b..0000000 --- a/light_ws2812_AVR/Makefile +++ /dev/null @@ -1,40 +0,0 @@ -# Makefile to build light_ws2812 library examples -# This is not a very good example of a makefile - the dependencies do not work, therefore everything is rebuilt every time. - -# Change these parameters for your device - -F_CPU = 16000000 -# DEVICE = attiny85 -DEVICE = atmega168p -# -# Tools: -CC = avr-gcc - -LIB = light_ws2812 -EXAMPLES = RGB_blinky RGBW_blinky Chained_writes Rainbow -DEP = ws2812_config.h Light_WS2812/light_ws2812.h - -CFLAGS = -g2 -I. -ILight_WS2812 -mmcu=$(DEVICE) -DF_CPU=$(F_CPU) -CFLAGS+= -Os -ffunction-sections -fdata-sections -fpack-struct -fno-move-loop-invariants -fno-tree-scev-cprop -fno-inline-small-functions -CFLAGS+= -Wall -Wno-pointer-to-int-cast -#CFLAGS+= -Wa,-ahls=$<.lst - -LDFLAGS = -Wl,--relax,--section-start=.text=0,-Map=main.map - -all: $(EXAMPLES) - -$(LIB): $(DEP) - @echo Building Library - @$(CC) $(CFLAGS) -o Objects/$@.o -c Light_WS2812/$@.c - -$(EXAMPLES): $(LIB) - @echo Building $@ - @$(CC) $(CFLAGS) -o Objects/$@.o Examples/$@.c Light_WS2812/$^.c - @avr-size Objects/$@.o - @avr-objcopy -j .text -j .data -O ihex Objects/$@.o $@.hex - @avr-objdump -d -S Objects/$@.o >Objects/$@.lss - -.PHONY: clean - -clean: - rm -f *.hex Objects/*.o Objects/*.lss diff --git a/light_ws2812_AVR/Objects/obj files go here.txt b/light_ws2812_AVR/Objects/obj files go here.txt deleted file mode 100644 index 7b4d68d..0000000 --- a/light_ws2812_AVR/Objects/obj files go here.txt +++ /dev/null @@ -1 +0,0 @@ -empty \ No newline at end of file diff --git a/main.c b/main.c deleted file mode 100644 index 4d9b340..0000000 --- a/main.c +++ /dev/null @@ -1,42 +0,0 @@ -#define F_CPU 1000000UL - -#include -#include -#include"fix_fft.h" -#include"avr_adc.h" -#include"light_ws2812_AVR/Light_WS2812/ws2812_config.h" -#include"light_ws2812_AVR/Light_WS2812/light_ws2812.h" - - -#define STARTADC ADCSRA |= _BS(ADSC) -#define PB_mic PB0 - -int main (void) -{ - int i; - char sample[128]; - char im[128]; - struct cRGB led_bar1[1]; - //DDRB = (1< -# to submit bug reports. -#AVRDUDE_VERBOSE = -v -v - -AVRDUDE_BASIC = -p $(MCU) -c $(AVRDUDE_PROGRAMMER) -B4 -AVRDUDE_FLAGS = $(AVRDUDE_BASIC) $(AVRDUDE_NO_VERIFY) $(AVRDUDE_VERBOSE) $(AVRDUDE_ERASE_COUNTER) - - -CC = avr-gcc -OBJCOPY = avr-objcopy -OBJDUMP = avr-objdump -SIZE = avr-size -NM = avr-nm -AVRDUDE = avrdude -REMOVE = rm -f -MV = mv -f - -# Define all object files. -OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) - -# Define all listing files. -LST = $(ASRC:.S=.lst) $(SRC:.c=.lst) - -# Combine all necessary flags and optional flags. -# Add target processor to flags. -ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) -ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) - - -# Default target. -all: build - -build: elf hex eep - -elf: $(TARGET).elf -hex: $(TARGET).hex -eep: $(TARGET).eep -lss: $(TARGET).lss -sym: $(TARGET).sym - - -# Program the device. -program: $(TARGET).hex $(TARGET).eep - $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) - - - - -# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. -COFFCONVERT=$(OBJCOPY) --debugging \ ---change-section-address .data-0x800000 \ ---change-section-address .bss-0x800000 \ ---change-section-address .noinit-0x800000 \ ---change-section-address .eeprom-0x810000 - - -coff: $(TARGET).elf - $(COFFCONVERT) -O coff-avr $(TARGET).elf $(TARGET).cof - - -extcoff: $(TARGET).elf - $(COFFCONVERT) -O coff-ext-avr $(TARGET).elf $(TARGET).cof - - -.SUFFIXES: .elf .hex .eep .lss .sym - -.elf.hex: - $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ - -.elf.eep: - -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ - --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ - -# Create extended listing file from ELF output file. -.elf.lss: - $(OBJDUMP) -h -S $< > $@ - -# Create a symbol table from ELF output file. -.elf.sym: - $(NM) -n $< > $@ - - - -# Link: create ELF output file from object files. -$(TARGET).elf: $(OBJ) - $(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS) - - -# Compile: create object files from C source files. -.c.o: - $(CC) -c $(ALL_CFLAGS) $< -o $@ - - -# Compile: create assembler files from C source files. -.c.s: - $(CC) -S $(ALL_CFLAGS) $< -o $@ - - -# Assemble: create object files from assembler source files. -.S.o: - $(CC) -c $(ALL_ASFLAGS) $< -o $@ - - - -# Target: clean project. -clean: - $(REMOVE) $(TARGET).hex $(TARGET).eep $(TARGET).cof $(TARGET).elf \ - $(TARGET).map $(TARGET).sym $(TARGET).lss \ - $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) - -depend: - if grep '^# DO NOT DELETE' $(MAKEFILE) >/dev/null; \ - then \ - sed -e '/^# DO NOT DELETE/,$$d' $(MAKEFILE) > \ - $(MAKEFILE).$$$$ && \ - $(MV) $(MAKEFILE).$$$$ $(MAKEFILE); \ - fi - echo '# DO NOT DELETE THIS LINE -- make depend depends on it.' \ - >> $(MAKEFILE); \ - $(CC) -M -mmcu=$(MCU) $(CDEFS) $(CINCS) $(SRC) $(ASRC) >> $(MAKEFILE) - -.PHONY: all build elf hex eep lss sym program coff extcoff clean depend diff --git a/micronucleus b/micronucleus deleted file mode 100755 index d410cb4..0000000 Binary files a/micronucleus and /dev/null differ