remove duplicates
This commit is contained in:
parent
3942447238
commit
adc1d12100
@ -1,6 +0,0 @@
|
||||
#!/bin/bash
|
||||
|
||||
echo "Device must be rooted!!"
|
||||
echo "login as adb shell"
|
||||
echo "remount /system/ as rw"
|
||||
adb shell && su && mount -o rw,remount /system
|
||||
@ -1,3 +0,0 @@
|
||||
echo "tl;dr /vendor/etc/audio_policy_configuration.xml, remove or comment out the part about AUDIO_FORMAT_VORBIS."
|
||||
|
||||
|
||||
@ -1,2 +0,0 @@
|
||||
#!/bin/bash
|
||||
xinit /usr/bin/arduino $* -- :1
|
||||
@ -1,2 +0,0 @@
|
||||
echo 416 | sudo tee /sys/class/backlight/intel_backlight/brightness
|
||||
|
||||
@ -1,6 +0,0 @@
|
||||
#!/bin/sh
|
||||
#Doing adata backup to server-ccppi
|
||||
Source="/home/ccppi2"
|
||||
Destination="ccppi@192.168.1.3:/home/backup/by-Device/ccppi-nb/"
|
||||
|
||||
rsync -rtsv "$Source" "$Destination"
|
||||
@ -1 +0,0 @@
|
||||
LD_LIBRARY_PATH=/usr/lib/jvm/java-8-openjdk/jre/lib/amd64/server /usr/bin/bitwig-studio
|
||||
@ -1,13 +0,0 @@
|
||||
#!/bin/bash
|
||||
|
||||
tutti="https://www.tutti.ch/de/li/ganze-schweiz?q="
|
||||
ricardo="https://www.ricardo.ch/de/s/"
|
||||
toppreis="https://www.toppreise.ch/produktsuche?q="
|
||||
|
||||
broswer='/usr/bin/firefox --new-window'
|
||||
cmd='$broswer "$ricardo$1" &'
|
||||
eval "$cmd"
|
||||
cmd='$broswer "$tutti$1" &'
|
||||
eval "$cmd"
|
||||
cmd='$broswer "$toppreis$1" &'
|
||||
eval "$cmd"
|
||||
@ -1,50 +0,0 @@
|
||||
#!/bin/bash
|
||||
|
||||
intern="eDP-1-1"
|
||||
extern="HDMI-1-1"
|
||||
|
||||
reset_displays(){
|
||||
xrandr --output $intern --off
|
||||
xrandr --output $extern --off
|
||||
|
||||
}
|
||||
|
||||
set_all(){
|
||||
reset_displays
|
||||
xrandr --output $intern --auto
|
||||
xrandr --output $extern --left-of $intern --auto
|
||||
}
|
||||
|
||||
set_intern(){
|
||||
reset_displays
|
||||
xrandr --output $intern --auto
|
||||
xrandr --output $extern --off
|
||||
}
|
||||
|
||||
set_extern(){
|
||||
reset_displays
|
||||
xrandr --output $intern --off
|
||||
xrandr --output $extern --auto
|
||||
}
|
||||
tog=0
|
||||
|
||||
if [ "$1" == "-a" ]
|
||||
then
|
||||
set_all
|
||||
elif [ "$1" == "-i" ]
|
||||
then
|
||||
set_intern
|
||||
elif [ "$1" == "-e" ]
|
||||
then
|
||||
set_extern
|
||||
elif [ "$1" == "-t" ]
|
||||
then
|
||||
|
||||
if [ "$tog" lt "2" ]; then tog=$((tog+1)) ;fi
|
||||
if [ "$tog" gt "2"]; then tog=0 ;fi
|
||||
if [ "$tog" == "0" ]; then set_all ;fi
|
||||
if [ "$tog" == "1" ]; then set_intern ;fi
|
||||
if [ "$tog" == "2" ]; then set_extern;fi
|
||||
else
|
||||
echo $'display-conf [ARGUMENT] \n Arguments: \n -i : intern \n -e : extern \n -a: all'
|
||||
fi
|
||||
@ -1,4 +0,0 @@
|
||||
xrandr --output eDP-1-1 --off
|
||||
xrandr --output HDMI-1-1 --auto
|
||||
|
||||
|
||||
@ -1,4 +0,0 @@
|
||||
xrandr --output HDMI-1-1 --off
|
||||
xrandr --output eDP-1-1 --auto
|
||||
|
||||
|
||||
Binary file not shown.
@ -1,26 +0,0 @@
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
#include <stdlib.h>
|
||||
int main()
|
||||
{
|
||||
char note[32];
|
||||
char cmd[42];
|
||||
char c;
|
||||
printf("a -add \n v -view\n");
|
||||
system("/bin/stty raw");//remove enter
|
||||
c = getc(stdin);
|
||||
system("/bin/stty cooked");
|
||||
if (c == 'a')
|
||||
{
|
||||
fgets(note,32,stdin);
|
||||
printf("you wrote: %s", note);
|
||||
snprintf(cmd,sizeof(cmd),"dnote add %s",note);
|
||||
}
|
||||
if (c == 'v')
|
||||
{
|
||||
snprintf(cmd,sizeof(cmd),"dnote view");
|
||||
}
|
||||
system(cmd);
|
||||
|
||||
return 0;
|
||||
}
|
||||
@ -1,12 +0,0 @@
|
||||
[Unit]
|
||||
Description=Show time in dwm dmenu bar
|
||||
|
||||
[Service]
|
||||
|
||||
#WorkingDirectory=<directory_of_script e.g. /root>
|
||||
ExecStart=/home/ccppi/.scripts/dwm-time.sh
|
||||
Restart=always
|
||||
|
||||
[Install]
|
||||
WantedBy=multi-user.target
|
||||
|
||||
@ -1,5 +0,0 @@
|
||||
while true; do
|
||||
xsetroot -name "$(date)"
|
||||
sleep 2
|
||||
done
|
||||
|
||||
@ -1,2 +0,0 @@
|
||||
du -a . | sort -n -r | head -n 20
|
||||
|
||||
@ -1,2 +0,0 @@
|
||||
sudo find / -xdev -type f -size +100M
|
||||
|
||||
@ -1,6 +0,0 @@
|
||||
#!/bin/sh
|
||||
|
||||
IP="`wget -q -O - http://ipecho.net/plain`"
|
||||
echo $IP
|
||||
whois $IP | grep country: | cut -d ' ' -f9,10
|
||||
|
||||
@ -1,12 +0,0 @@
|
||||
dmidecode -t0
|
||||
dmidecode -t1
|
||||
|
||||
VBoxManage setextradata "inspiron" VBoxInternal/Devices/pcbios/0/Config/DmiBIOSVendor "American Megatrends Inc."
|
||||
VBoxManage setextradata "inspiron" VBoxInternal/Devices/pcbios/0/Config/DmiBIOSVersion "1.05.14"
|
||||
VBoxManage setextradata "inspiron" VBoxInternal/Devices/pcbios/0/Config/DmiBIOSReleaseDate "03/31/2016"
|
||||
VBoxManage setextradata "inspiron" VBoxInternal/Devices/pcbios/0/Config/DmiSystemVendor "Notebook"
|
||||
VBoxManage setextradata "inspiron" VBoxInternal/Devices/pcbios/0/Config/DmiSystemProduct "W65_W67RB"
|
||||
VBoxManage setextradata "inspiron" VBoxInternal/Devices/pcbios/0/Config/DmiSystemVersion "Not Applicable"
|
||||
VBoxManage setextradata "inspiron" VBoxInternal/Devices/pcbios/0/Config/DmiSystemSerial "Not Applicable"
|
||||
VBoxManage setextradata "inspiron" VBoxInternal/Devices/pcbios/0/Config/DmiSystemFamily "Not Applicable"
|
||||
VBoxManage setextradata "inspiron" VBoxInternal/Devices/pcbios/0/Config/DmiSystemUuid "2e5bfa80-56c3-0000-0000-000000000000"
|
||||
@ -1 +0,0 @@
|
||||
gpg --keyserver keyserver.ubuntu.com --recv-key <key number>
|
||||
@ -1,71 +0,0 @@
|
||||
#!/usr/bin/env python3
|
||||
# -*- coding: utf-8 -*-
|
||||
|
||||
# Based on:
|
||||
# https://docs.python.org/3/library/email-examples.html
|
||||
|
||||
import sys
|
||||
import os
|
||||
import tempfile
|
||||
import mimetypes
|
||||
import webbrowser
|
||||
from email import policy
|
||||
from email.parser import BytesParser
|
||||
|
||||
|
||||
raw = sys.stdin.buffer.read()
|
||||
|
||||
if not os.isatty(0):
|
||||
fd = os.open('/dev/tty', os.O_RDONLY)
|
||||
if fd < 0:
|
||||
sys.stderr.write('Unable to open an input tty.\n')
|
||||
sys.exit(-1)
|
||||
else:
|
||||
os.dup2(fd, 0)
|
||||
os.close(fd)
|
||||
|
||||
msg = BytesParser(policy=policy.default).parsebytes(raw)
|
||||
|
||||
# We can extract the richest alternative in order to display it:
|
||||
richest = msg.get_body()
|
||||
partfiles = {}
|
||||
if richest['content-type'].maintype == 'text':
|
||||
if richest['content-type'].subtype == 'plain':
|
||||
for line in richest.get_content().splitlines():
|
||||
print(line)
|
||||
sys.exit()
|
||||
elif richest['content-type'].subtype == 'html':
|
||||
body = richest
|
||||
else:
|
||||
print("Don't know how to display {}".format(richest.get_content_type()))
|
||||
sys.exit()
|
||||
elif richest['content-type'].content_type == 'multipart/related':
|
||||
body = richest.get_body(preferencelist=('html'))
|
||||
for part in richest.iter_attachments():
|
||||
fn = part.get_filename()
|
||||
if fn:
|
||||
extension = os.path.splitext(part.get_filename())[1]
|
||||
else:
|
||||
extension = mimetypes.guess_extension(part.get_content_type())
|
||||
with tempfile.NamedTemporaryFile(suffix=extension, delete=False) as f:
|
||||
f.write(part.get_content())
|
||||
# again strip the <> to go from email form of cid to html form.
|
||||
partfiles[part['content-id'][1:-1]] = f.name
|
||||
else:
|
||||
print("Don't know how to display {}".format(richest.get_content_type()))
|
||||
sys.exit()
|
||||
with tempfile.NamedTemporaryFile(mode='w', delete=False) as f:
|
||||
# The magic_html_parser has to rewrite the href="cid:...." attributes to
|
||||
# point to the filenames in partfiles. It also has to do a safety-sanitize
|
||||
# of the html. It could be written using html.parser.
|
||||
template = """
|
||||
<!DOCTYPE html><html>
|
||||
<head><meta charset="utf-8"></head>
|
||||
<body>{}</body>
|
||||
</html>
|
||||
"""
|
||||
f.write(template.format(body.get_content()))
|
||||
webbrowser.open(f.name)
|
||||
# os.remove(f.name)
|
||||
for fn in partfiles.values():
|
||||
os.remove(fn)
|
||||
@ -1 +0,0 @@
|
||||
localectl set-x11-keymap ch,de pc105
|
||||
@ -1 +0,0 @@
|
||||
sudo sysctl -w vm.swappiness=10
|
||||
@ -1 +0,0 @@
|
||||
LD_PRELOAD=/usr/lib/libKF5WidgetsAddons.so lmms
|
||||
@ -1,9 +0,0 @@
|
||||
|
||||
#!/bin/sh
|
||||
notmuch new
|
||||
# retag all "new" messages "inbox" and "unread"
|
||||
notmuch tag +inbox +unread -new -- tag:new
|
||||
# tag all messages from "me" as sent and remove tags inbox and unread
|
||||
notmuch tag -new -inbox +sent -- from:me@example.org or from:me@myself.com
|
||||
# tag newsletters, but dont show them in inbox
|
||||
notmuch tag +newsletters +unread -new -- from:newsletter@example.org or subject:'newsletter*'
|
||||
@ -1,3 +0,0 @@
|
||||
notmuch search --output=files --format=text0 tag:killed | xargs -r0 rm
|
||||
notmuch new
|
||||
|
||||
@ -1,24 +0,0 @@
|
||||
|
||||
echo gameing > /tmp/fanmode
|
||||
|
||||
sudo nvidia-smi -pl 187 #powerlimit to max limited by driver
|
||||
|
||||
sudo nvidia-settings -a "[gpu:0]/GPUFanControlState=1" -a "[fan:0]/GPUTargetFanSpeed=75"
|
||||
|
||||
sudo nvidia-settings -a "[gpu:0]/GPUGraphicsClockOffset[3]=120"
|
||||
|
||||
#sudo nvidia-settings -a '[gpu:0]/GPUGraphicsMemoryOffset=225' #maybe depreacet
|
||||
sudo nvidia-settings -a '[gpu:0]/GPUMemoryTransferRateOffset[3]=200'
|
||||
|
||||
|
||||
# working oc settings
|
||||
# Core +125
|
||||
# +130 SOMETIMES CRASHES
|
||||
#
|
||||
# Memory +200 ok with custom fan
|
||||
# +225 ok with fan speed 63% 2800 rpm
|
||||
#
|
||||
#
|
||||
#
|
||||
#Hints
|
||||
# nvtop
|
||||
@ -1,5 +0,0 @@
|
||||
#!/bin/bash
|
||||
#workaround for pulseaudio with overwrites /usr/ directorys while updating, in combination with usb-soundcards
|
||||
#with are much to loud
|
||||
sudo cp ./pulse-fix-volume.sh.common /usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common
|
||||
pulseaudio -k
|
||||
@ -1,187 +0,0 @@
|
||||
# This file is part of PulseAudio.
|
||||
#
|
||||
# PulseAudio is free software; you can redistribute it and/or modify
|
||||
# it under the terms of the GNU Lesser General Public License as
|
||||
# published by the Free Software Foundation; either version 2.1 of the
|
||||
# License, or (at your option) any later version.
|
||||
#
|
||||
# PulseAudio is distributed in the hope that it will be useful, but
|
||||
# WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
# General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU Lesser General Public License
|
||||
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
; Common part of all paths
|
||||
|
||||
; So here's generally how mixer paths are used by PA: PA goes through
|
||||
; a mixer path file from top to bottom and checks if a mixer element
|
||||
; described therein exists. If so it is added to the list of mixer
|
||||
; elements PA will control, keeping the order it read them in. If a
|
||||
; mixer element described here has set the required= or
|
||||
; required-absent= directives a path might not be accepted as valid
|
||||
; and is ignored in its entirety (see below). However usually if a
|
||||
; element listed here is missing this one element is ignored but not
|
||||
; the entire path.
|
||||
;
|
||||
; When a device shall be muted/unmuted *all* elements listed in a path
|
||||
; file with "switch = mute" will be toggled.
|
||||
;
|
||||
; When a device shall change its volume, PA will got through the list
|
||||
; of all elements with "volume = merge" and set the volume on the
|
||||
; first element. If that element does not support dB volumes, this is
|
||||
; where the story ends. If it does support dB volumes, PA divides the
|
||||
; requested volume by the volume that was set on this element, and
|
||||
; then go on to the next element with "volume = merge" and then set
|
||||
; that there, and so on. That way the first volume element in the
|
||||
; path will be the one that does the 'biggest' part of the overall
|
||||
; volume adjustment, with the remaining elements usually being set to
|
||||
; some value next to 0dB. This logic makes sure we get the full range
|
||||
; over all volume sliders and a very high granularity of volumes
|
||||
; already in hardware.
|
||||
;
|
||||
; All switches and enumerations set to "select" are exposed via the
|
||||
; "port" functionality of sinks/sources. Basically every possible
|
||||
; switch setting and every possible enumeration setting will be
|
||||
; combined and made into a "port". So make sure you don't list too
|
||||
; many switches/enums for exposing, because the number of ports might
|
||||
; rise exponentially.
|
||||
;
|
||||
; Only one path can be selected at a time. All paths that are valid
|
||||
; for an audio device will be exposed as "port" for the sink/source.
|
||||
|
||||
|
||||
; [General]
|
||||
; type = ... # The device type. It's highly recommended to set a type for every path.
|
||||
; # See parse_type() in alsa-mixer.c for supported values.
|
||||
; priority = ... # Priority for this path
|
||||
; description-key = ... # The path description is looked up from a table in path_verify() in
|
||||
; # src/modules/alsa/alsa-mixer.c. By default the path name (i.e. the file name
|
||||
; # minus the ".conf" suffix) is used as the lookup key, but if this option is
|
||||
; # set, then the given string is used as the key instead. In any case the
|
||||
; # "description" option can be used to override the path description.
|
||||
; description = ... # Description for this path. Overrides the normal description lookup logic, as
|
||||
; # described in the "description-key" documentation above.
|
||||
; mute-during-activation = yes | no # If this path supports hardware mute, should the hw mute be used while activating this
|
||||
; # path? In some cases this can reduce extra noises during port switching, while in other
|
||||
; # cases this can increase such noises. Default: no.
|
||||
; eld-device = ... # If this is an HDMI port, set to "auto" so that PulseAudio will try to read
|
||||
; # the monitor ELD information from the ALSA mixer. By default the ELD information
|
||||
; # is not read, because it's only applicable with HDMI. Earlier the "auto" option
|
||||
; # didn't exist, and the hw device index had to be manually configured. For
|
||||
; # backwards compatibility, it's still possible to manually configure the device
|
||||
; # index using this option.
|
||||
;
|
||||
; [Properties] # Property list for this path. The list is merged into the port property list.
|
||||
; <key> = <value> # Each property is defined on its own line.
|
||||
; ...
|
||||
;
|
||||
; [Option ...:...] # For each option of an enumeration or switch element
|
||||
; # that shall be exposed as a sink/source port. Needs to
|
||||
; # be named after the Element, followed by a colon, followed
|
||||
; # by the option name, resp. on/off if the element is a switch.
|
||||
; name = ... # Logical name to use in the path identifier
|
||||
; priority = ... # Priority if this is made into a device port
|
||||
; required = ignore | enumeration | any # In this element, this option must exist or the path will be invalid. ("any" is an alias for "enumeration".)
|
||||
; required-any = ignore | enumeration | any # In this element, either this or another option must exist (or an element)
|
||||
; required-absent = ignore | enumeration | any # In this element, this option must not exist or the path will be invalid
|
||||
;
|
||||
; [Element ...] # For each element that we shall control. The "..." here is the element name,
|
||||
; # or name and index separated by a comma.
|
||||
; required = ignore | switch | volume | enumeration | any # If set, require this element to be of this kind and available,
|
||||
; # otherwise don't consider this path valid for the card
|
||||
; required-any = ignore | switch | volume | enumeration | any # If set, at least one of the elements or jacks with required-any in this
|
||||
; # path must be present, otherwise this path is invalid for the card
|
||||
; required-absent = ignore | switch | volume # If set, require this element to not be of this kind and not
|
||||
; # available, otherwise don't consider this path valid for the card
|
||||
;
|
||||
; switch = ignore | mute | off | on | select # What to do with this switch: ignore it, make it follow mute status,
|
||||
; # always set it to off, always to on, or make it selectable as port.
|
||||
; # If set to 'select' you need to define an Option section for on
|
||||
; # and off
|
||||
; volume = ignore | merge | off | zero | <volume step> # What to do with this volume: ignore it, merge it into the device
|
||||
; # volume slider, always set it to the lowest value possible, or always
|
||||
; # set it to 0 dB (for whatever that means), or always set it to
|
||||
; # <volume step> (this only makes sense in path configurations where
|
||||
; # the exact hardware and driver are known beforehand).
|
||||
; volume-limit = <volume step> # Limit the maximum volume by disabling the volume steps above <volume step>.
|
||||
; enumeration = ignore | select # What to do with this enumeration, ignore it or make it selectable
|
||||
; # via device ports. If set to 'select' you need to define an Option section
|
||||
; # for each of the items you want to expose
|
||||
; direction = playback | capture # Is this relevant only for playback or capture? If not set this will implicitly be
|
||||
; # set the direction of the PCM device is opened as. Generally this doesn't need to be set
|
||||
; # unless you have a broken driver that has playback controls marked for capture or vice
|
||||
; # versa
|
||||
; direction-try-other = no | yes # If the element does not supported what is requested, try the other direction, too?
|
||||
;
|
||||
; override-map.1 = ... # Override the channel mask of the mixer control if the control only exposes a single channel
|
||||
; override-map.2 = ... # Override the channel masks of the mixer control if the control only exposes two channels
|
||||
; # Override maps should list for each element channel which high-level channels it controls via a
|
||||
; # channel mask. A channel mask may either be the name of a single channel, or the words "all-left",
|
||||
; # "all-right", "all-center", "all-front", "all-rear", and "all" to encode a specific subset of
|
||||
; # channels in a mask
|
||||
; [Jack ...] # For each jack that we will use for jack detection
|
||||
; # The name 'Jack Foo' must match ALSA's 'Foo Jack' control.
|
||||
; required = ignore | any # If not set to ignore, make the path invalid if this jack control is not present.
|
||||
; required-absent = ignore | any # If not set to ignore, make the path invalid if this jack control is present.
|
||||
; required-any = ignore | any # If not set to ignore, make the path invalid if no jack controls and no elements with
|
||||
; # the required-any are present.
|
||||
; state.plugged = yes | no | unknown # Normally a plugged jack would mean the port becomes available, and an unplugged means it's
|
||||
; state.unplugged = yes | no | unknown # unavailable, but the port status can be overridden by specifying state.plugged and/or state.unplugged.
|
||||
; append-pcm-to-name = no | yes # Add ",pcm=N" to the jack name? N is the hw PCM device index. HDMI jacks have
|
||||
; # the PCM device index in their name, but different drivers use different
|
||||
; # numbering schemes, so we can't hardcode the full jack name in our configuration
|
||||
; # files.
|
||||
|
||||
[Element PCM]
|
||||
switch = mute
|
||||
volume = ignore
|
||||
volume-limit = 0.007
|
||||
override-map.1 = all
|
||||
override-map.2 = all-left,all-right
|
||||
|
||||
[Element External Amplifier]
|
||||
switch = select
|
||||
|
||||
[Option External Amplifier:on]
|
||||
name = output-amplifier-on
|
||||
priority = 10
|
||||
|
||||
[Option External Amplifier:off]
|
||||
name = output-amplifier-off
|
||||
priority = 0
|
||||
|
||||
[Element Bass Boost]
|
||||
switch = select
|
||||
|
||||
[Option Bass Boost:on]
|
||||
name = output-bass-boost-on
|
||||
priority = 0
|
||||
|
||||
[Option Bass Boost:off]
|
||||
name = output-bass-boost-off
|
||||
priority = 10
|
||||
|
||||
[Element IEC958]
|
||||
switch = off
|
||||
|
||||
[Element IEC958 Optical Raw]
|
||||
switch = off
|
||||
|
||||
;;; 'Analog Output'
|
||||
|
||||
[Element Analog Output]
|
||||
enumeration = select
|
||||
|
||||
[Option Analog Output:Speakers]
|
||||
name = output-speaker
|
||||
priority = 10
|
||||
|
||||
[Option Analog Output:Headphones]
|
||||
name = output-headphones
|
||||
priority = 9
|
||||
|
||||
[Option Analog Output:FP Headphones]
|
||||
name = output-headphones
|
||||
priority = 8
|
||||
@ -1,3 +0,0 @@
|
||||
echo $1
|
||||
qrencode -t ansiutf8 "$1"
|
||||
|
||||
@ -1,3 +0,0 @@
|
||||
python3 -m radicale --config "~/.config/radicale/config"
|
||||
|
||||
|
||||
@ -1 +0,0 @@
|
||||
adb shell rm /data/system/locksettings.db
|
||||
@ -1 +0,0 @@
|
||||
convert -resize 50% $1 $1.resized
|
||||
@ -1,7 +0,0 @@
|
||||
#bluetoothctl &&
|
||||
|
||||
.scripts/nvidia-oc.sh
|
||||
cd "/mnt/Game-ssd/SteamLibrary/steamapps/common/Shadow of the Tomb Raider"
|
||||
./bin/ShadowOfTheTombRaider
|
||||
|
||||
|
||||
@ -1,8 +0,0 @@
|
||||
echo "starting vdirsyncer sync"
|
||||
vdirsyncer sync
|
||||
|
||||
echo "starting khal/ikhal"
|
||||
ikhal
|
||||
|
||||
echo "starting vdirsyncer sync"
|
||||
vdirsyncer sync
|
||||
@ -1 +0,0 @@
|
||||
ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 -c 3des-cbc admin@192.168.1.1
|
||||
@ -1,2 +0,0 @@
|
||||
export VK_ICD_FILENAMES="/usr/share/vulkan/icd.d/nvidia_icd.json"
|
||||
|
||||
@ -1,2 +0,0 @@
|
||||
startx /usr/bin/steamos-session -- :3
|
||||
# when stutering video libva-vdpau-driver and lib32-vdpau
|
||||
@ -1,6 +0,0 @@
|
||||
if [ "$1" == "zoom_in" ]; then
|
||||
nvidia-settings --assign CurrentMetaMode="HDMI-0: 1360x768_60 +0+0 { ViewPortIn=800x600 }"
|
||||
fi
|
||||
if [ "$1" == "zoom_out" ]; then
|
||||
nvidia-settings --assign CurrentMetaMode="HDMI-0: 1360x768_60 +0+0 { ViewPortIn=1360x768 }"
|
||||
fi
|
||||
@ -1,5 +0,0 @@
|
||||
|
||||
cd /home/ccppi/Downloads/dgvoodo/Syberia/
|
||||
WINEPREFIX=~/.local/share/Steam/steamapps/compatdata/46500/pfx wine dgVoodooCpl.exe
|
||||
|
||||
#DXVK_HUD=devinfo,fps,gpuload,memory DXVK_FRAME_RATE=60 WINEDLLOVERRIDES="D3D9.dll=n;D3D8.dll=n;D3DImm.dll=n;DDraw.dll=n" %command%
|
||||
@ -1 +0,0 @@
|
||||
ssh -L 9090:127.0.0.1:8384 alarm@192.168.1.4 -p9541
|
||||
@ -1,28 +0,0 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# Write/remove a task to do later.
|
||||
#
|
||||
# Select an existing entry to remove it from the file, or type a new entry to
|
||||
# add it.
|
||||
#
|
||||
|
||||
file="$HOME/.todo"
|
||||
touch "$file"
|
||||
height=$(wc -l "$file" | awk '{print $1}')
|
||||
prompt="Add/delete a task: "
|
||||
|
||||
cmd=$(dmenu -l "$height" -p "$prompt" "$@" < "$file")
|
||||
while [ -n "$cmd" ]; do
|
||||
if grep -q "^$cmd\$" "$file"; then
|
||||
grep -v "^$cmd\$" "$file" > "$file.$$"
|
||||
mv "$file.$$" "$file"
|
||||
height=$(( height - 1 ))
|
||||
else
|
||||
echo "$cmd" >> "$file"
|
||||
height=$(( height + 1 ))
|
||||
fi
|
||||
|
||||
cmd=$(dmenu -l "$height" -p "$prompt" "$@" < "$file")
|
||||
done
|
||||
|
||||
exit 0
|
||||
@ -1 +0,0 @@
|
||||
udevadm control --reload-rules && udevadm trigger
|
||||
@ -1 +0,0 @@
|
||||
:w !sudo tee %
|
||||
@ -1,4 +0,0 @@
|
||||
#!/bin/bash
|
||||
|
||||
sudo nmcli radio wifi off
|
||||
sudo rfkill unblock wlan
|
||||
@ -1,14 +0,0 @@
|
||||
#export VK_ICD_FILENAMES=/usr/share/vulkan/icd.d/radeon_icd.i686.json:/usr/share/vulkan/icd.d/radeon_icd.x86_64.json
|
||||
|
||||
path=/usr/share/vulkan/icd.d/
|
||||
echo "https://gitlab.freedesktop.org/mesa/mesa/-/issues/4112"
|
||||
echo "remove tha strange shit"
|
||||
sudo rm $path/intel_icd.i686.json.disabled
|
||||
sudo rm $path/intel_icd.x86_64.json.disabled
|
||||
|
||||
|
||||
sudo mv $path/intel_icd.i686.json $path/intel_icd.i686.json.disabled
|
||||
sudo mv $path/intel_icd.x86_64.json $path/intel_icd.x86_64.json.disabled
|
||||
#sudo mv $path/nvidia_icd.json $path/nvidia_icd.json.disabled
|
||||
|
||||
echo " it doesnt work? look in /usr/share/vulkan/icd.d/"
|
||||
@ -1,10 +0,0 @@
|
||||
killall -9 wineserver
|
||||
killall -9 winemenubuilder
|
||||
killall -9 winedevice.exe
|
||||
killall -9 winedevice.exe
|
||||
killall -9 winedbg
|
||||
killall -9 wine
|
||||
killall -9 wineboot.exe
|
||||
echo "Running wine-fuckers"
|
||||
ps -e | grep wine
|
||||
|
||||
@ -1,8 +0,0 @@
|
||||
rm -f ~/.local/share/applications/wine-extension*.desktop
|
||||
rm -f ~/.local/share/icons/hicolor/*/*/application-x-wine-extension*
|
||||
rm -f ~/.local/share/applications/mimeinfo.cache
|
||||
rm -f ~/.local/share/mime/packages/x-wine*
|
||||
rm -f ~/.local/share/mime/application/x-wine-extension*
|
||||
rm -f ~/.local/share/applications/wine/wine-extension*
|
||||
update-desktop-database ~/.local/share/applications
|
||||
update-mime-database ~/.local/share/mime/
|
||||
@ -1,20 +0,0 @@
|
||||
#dependencies
|
||||
#kdialog youtube-dl
|
||||
|
||||
folder=$(date +"%m_%Y")
|
||||
|
||||
cd ~/Music/
|
||||
|
||||
|
||||
mkdir $folder
|
||||
cd $folder
|
||||
|
||||
|
||||
url=$(kdialog --title "Input dialog" --inputbox "Paste youtube link")
|
||||
|
||||
|
||||
echo "eingegebener link: " $url
|
||||
youtube-dl -i --extract-audio --audio-format vorbis -o "%(title)s.%(ext)s" $url
|
||||
|
||||
kdialog --title "the link "$url" has finished" --passivepopup \
|
||||
"Download and conversion finnished" 10
|
||||
Loading…
Reference in New Issue
Block a user