remove duplicates

This commit is contained in:
Jonathan Wyss 2024-03-25 20:32:56 +01:00
parent 3942447238
commit adc1d12100
48 changed files with 0 additions and 585 deletions

View File

@ -1,6 +0,0 @@
#!/bin/bash
echo "Device must be rooted!!"
echo "login as adb shell"
echo "remount /system/ as rw"
adb shell && su && mount -o rw,remount /system

View File

@ -1,3 +0,0 @@
echo "tl;dr /vendor/etc/audio_policy_configuration.xml, remove or comment out the part about AUDIO_FORMAT_VORBIS."

View File

@ -1,2 +0,0 @@
#!/bin/bash
xinit /usr/bin/arduino $* -- :1

View File

@ -1,2 +0,0 @@
echo 416 | sudo tee /sys/class/backlight/intel_backlight/brightness

View File

@ -1,6 +0,0 @@
#!/bin/sh
#Doing adata backup to server-ccppi
Source="/home/ccppi2"
Destination="ccppi@192.168.1.3:/home/backup/by-Device/ccppi-nb/"
rsync -rtsv "$Source" "$Destination"

View File

@ -1 +0,0 @@
LD_LIBRARY_PATH=/usr/lib/jvm/java-8-openjdk/jre/lib/amd64/server /usr/bin/bitwig-studio

View File

@ -1,13 +0,0 @@
#!/bin/bash
tutti="https://www.tutti.ch/de/li/ganze-schweiz?q="
ricardo="https://www.ricardo.ch/de/s/"
toppreis="https://www.toppreise.ch/produktsuche?q="
broswer='/usr/bin/firefox --new-window'
cmd='$broswer "$ricardo$1" &'
eval "$cmd"
cmd='$broswer "$tutti$1" &'
eval "$cmd"
cmd='$broswer "$toppreis$1" &'
eval "$cmd"

View File

@ -1,50 +0,0 @@
#!/bin/bash
intern="eDP-1-1"
extern="HDMI-1-1"
reset_displays(){
xrandr --output $intern --off
xrandr --output $extern --off
}
set_all(){
reset_displays
xrandr --output $intern --auto
xrandr --output $extern --left-of $intern --auto
}
set_intern(){
reset_displays
xrandr --output $intern --auto
xrandr --output $extern --off
}
set_extern(){
reset_displays
xrandr --output $intern --off
xrandr --output $extern --auto
}
tog=0
if [ "$1" == "-a" ]
then
set_all
elif [ "$1" == "-i" ]
then
set_intern
elif [ "$1" == "-e" ]
then
set_extern
elif [ "$1" == "-t" ]
then
if [ "$tog" lt "2" ]; then tog=$((tog+1)) ;fi
if [ "$tog" gt "2"]; then tog=0 ;fi
if [ "$tog" == "0" ]; then set_all ;fi
if [ "$tog" == "1" ]; then set_intern ;fi
if [ "$tog" == "2" ]; then set_extern;fi
else
echo $'display-conf [ARGUMENT] \n Arguments: \n -i : intern \n -e : extern \n -a: all'
fi

View File

@ -1,4 +0,0 @@
xrandr --output eDP-1-1 --off
xrandr --output HDMI-1-1 --auto

View File

@ -1,4 +0,0 @@
xrandr --output HDMI-1-1 --off
xrandr --output eDP-1-1 --auto

Binary file not shown.

View File

@ -1,26 +0,0 @@
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
int main()
{
char note[32];
char cmd[42];
char c;
printf("a -add \n v -view\n");
system("/bin/stty raw");//remove enter
c = getc(stdin);
system("/bin/stty cooked");
if (c == 'a')
{
fgets(note,32,stdin);
printf("you wrote: %s", note);
snprintf(cmd,sizeof(cmd),"dnote add %s",note);
}
if (c == 'v')
{
snprintf(cmd,sizeof(cmd),"dnote view");
}
system(cmd);
return 0;
}

View File

@ -1,12 +0,0 @@
[Unit]
Description=Show time in dwm dmenu bar
[Service]
#WorkingDirectory=<directory_of_script e.g. /root>
ExecStart=/home/ccppi/.scripts/dwm-time.sh
Restart=always
[Install]
WantedBy=multi-user.target

View File

@ -1,5 +0,0 @@
while true; do
xsetroot -name "$(date)"
sleep 2
done

View File

@ -1,2 +0,0 @@
du -a . | sort -n -r | head -n 20

View File

@ -1,2 +0,0 @@
sudo find / -xdev -type f -size +100M

View File

@ -1,6 +0,0 @@
#!/bin/sh
IP="`wget -q -O - http://ipecho.net/plain`"
echo $IP
whois $IP | grep country: | cut -d ' ' -f9,10

View File

@ -1,12 +0,0 @@
dmidecode -t0
dmidecode -t1
VBoxManage setextradata "inspiron" VBoxInternal/Devices/pcbios/0/Config/DmiBIOSVendor "American Megatrends Inc."
VBoxManage setextradata "inspiron" VBoxInternal/Devices/pcbios/0/Config/DmiBIOSVersion "1.05.14"
VBoxManage setextradata "inspiron" VBoxInternal/Devices/pcbios/0/Config/DmiBIOSReleaseDate "03/31/2016"
VBoxManage setextradata "inspiron" VBoxInternal/Devices/pcbios/0/Config/DmiSystemVendor "Notebook"
VBoxManage setextradata "inspiron" VBoxInternal/Devices/pcbios/0/Config/DmiSystemProduct "W65_W67RB"
VBoxManage setextradata "inspiron" VBoxInternal/Devices/pcbios/0/Config/DmiSystemVersion "Not Applicable"
VBoxManage setextradata "inspiron" VBoxInternal/Devices/pcbios/0/Config/DmiSystemSerial "Not Applicable"
VBoxManage setextradata "inspiron" VBoxInternal/Devices/pcbios/0/Config/DmiSystemFamily "Not Applicable"
VBoxManage setextradata "inspiron" VBoxInternal/Devices/pcbios/0/Config/DmiSystemUuid "2e5bfa80-56c3-0000-0000-000000000000"

View File

@ -1 +0,0 @@
gpg --keyserver keyserver.ubuntu.com --recv-key <key number>

View File

@ -1,71 +0,0 @@
#!/usr/bin/env python3
# -*- coding: utf-8 -*-
# Based on:
# https://docs.python.org/3/library/email-examples.html
import sys
import os
import tempfile
import mimetypes
import webbrowser
from email import policy
from email.parser import BytesParser
raw = sys.stdin.buffer.read()
if not os.isatty(0):
fd = os.open('/dev/tty', os.O_RDONLY)
if fd < 0:
sys.stderr.write('Unable to open an input tty.\n')
sys.exit(-1)
else:
os.dup2(fd, 0)
os.close(fd)
msg = BytesParser(policy=policy.default).parsebytes(raw)
# We can extract the richest alternative in order to display it:
richest = msg.get_body()
partfiles = {}
if richest['content-type'].maintype == 'text':
if richest['content-type'].subtype == 'plain':
for line in richest.get_content().splitlines():
print(line)
sys.exit()
elif richest['content-type'].subtype == 'html':
body = richest
else:
print("Don't know how to display {}".format(richest.get_content_type()))
sys.exit()
elif richest['content-type'].content_type == 'multipart/related':
body = richest.get_body(preferencelist=('html'))
for part in richest.iter_attachments():
fn = part.get_filename()
if fn:
extension = os.path.splitext(part.get_filename())[1]
else:
extension = mimetypes.guess_extension(part.get_content_type())
with tempfile.NamedTemporaryFile(suffix=extension, delete=False) as f:
f.write(part.get_content())
# again strip the <> to go from email form of cid to html form.
partfiles[part['content-id'][1:-1]] = f.name
else:
print("Don't know how to display {}".format(richest.get_content_type()))
sys.exit()
with tempfile.NamedTemporaryFile(mode='w', delete=False) as f:
# The magic_html_parser has to rewrite the href="cid:...." attributes to
# point to the filenames in partfiles. It also has to do a safety-sanitize
# of the html. It could be written using html.parser.
template = """
<!DOCTYPE html><html>
<head><meta charset="utf-8"></head>
<body>{}</body>
</html>
"""
f.write(template.format(body.get_content()))
webbrowser.open(f.name)
# os.remove(f.name)
for fn in partfiles.values():
os.remove(fn)

View File

@ -1 +0,0 @@
localectl set-x11-keymap ch,de pc105

View File

@ -1 +0,0 @@
sudo sysctl -w vm.swappiness=10

View File

@ -1 +0,0 @@
LD_PRELOAD=/usr/lib/libKF5WidgetsAddons.so lmms

View File

@ -1,9 +0,0 @@
#!/bin/sh
notmuch new
# retag all "new" messages "inbox" and "unread"
notmuch tag +inbox +unread -new -- tag:new
# tag all messages from "me" as sent and remove tags inbox and unread
notmuch tag -new -inbox +sent -- from:me@example.org or from:me@myself.com
# tag newsletters, but dont show them in inbox
notmuch tag +newsletters +unread -new -- from:newsletter@example.org or subject:'newsletter*'

View File

@ -1,3 +0,0 @@
notmuch search --output=files --format=text0 tag:killed | xargs -r0 rm
notmuch new

View File

@ -1,24 +0,0 @@
echo gameing > /tmp/fanmode
sudo nvidia-smi -pl 187 #powerlimit to max limited by driver
sudo nvidia-settings -a "[gpu:0]/GPUFanControlState=1" -a "[fan:0]/GPUTargetFanSpeed=75"
sudo nvidia-settings -a "[gpu:0]/GPUGraphicsClockOffset[3]=120"
#sudo nvidia-settings -a '[gpu:0]/GPUGraphicsMemoryOffset=225' #maybe depreacet
sudo nvidia-settings -a '[gpu:0]/GPUMemoryTransferRateOffset[3]=200'
# working oc settings
# Core +125
# +130 SOMETIMES CRASHES
#
# Memory +200 ok with custom fan
# +225 ok with fan speed 63% 2800 rpm
#
#
#
#Hints
# nvtop

View File

@ -1,5 +0,0 @@
#!/bin/bash
#workaround for pulseaudio with overwrites /usr/ directorys while updating, in combination with usb-soundcards
#with are much to loud
sudo cp ./pulse-fix-volume.sh.common /usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common
pulseaudio -k

View File

@ -1,187 +0,0 @@
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as
# published by the Free Software Foundation; either version 2.1 of the
# License, or (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
; Common part of all paths
; So here's generally how mixer paths are used by PA: PA goes through
; a mixer path file from top to bottom and checks if a mixer element
; described therein exists. If so it is added to the list of mixer
; elements PA will control, keeping the order it read them in. If a
; mixer element described here has set the required= or
; required-absent= directives a path might not be accepted as valid
; and is ignored in its entirety (see below). However usually if a
; element listed here is missing this one element is ignored but not
; the entire path.
;
; When a device shall be muted/unmuted *all* elements listed in a path
; file with "switch = mute" will be toggled.
;
; When a device shall change its volume, PA will got through the list
; of all elements with "volume = merge" and set the volume on the
; first element. If that element does not support dB volumes, this is
; where the story ends. If it does support dB volumes, PA divides the
; requested volume by the volume that was set on this element, and
; then go on to the next element with "volume = merge" and then set
; that there, and so on. That way the first volume element in the
; path will be the one that does the 'biggest' part of the overall
; volume adjustment, with the remaining elements usually being set to
; some value next to 0dB. This logic makes sure we get the full range
; over all volume sliders and a very high granularity of volumes
; already in hardware.
;
; All switches and enumerations set to "select" are exposed via the
; "port" functionality of sinks/sources. Basically every possible
; switch setting and every possible enumeration setting will be
; combined and made into a "port". So make sure you don't list too
; many switches/enums for exposing, because the number of ports might
; rise exponentially.
;
; Only one path can be selected at a time. All paths that are valid
; for an audio device will be exposed as "port" for the sink/source.
; [General]
; type = ... # The device type. It's highly recommended to set a type for every path.
; # See parse_type() in alsa-mixer.c for supported values.
; priority = ... # Priority for this path
; description-key = ... # The path description is looked up from a table in path_verify() in
; # src/modules/alsa/alsa-mixer.c. By default the path name (i.e. the file name
; # minus the ".conf" suffix) is used as the lookup key, but if this option is
; # set, then the given string is used as the key instead. In any case the
; # "description" option can be used to override the path description.
; description = ... # Description for this path. Overrides the normal description lookup logic, as
; # described in the "description-key" documentation above.
; mute-during-activation = yes | no # If this path supports hardware mute, should the hw mute be used while activating this
; # path? In some cases this can reduce extra noises during port switching, while in other
; # cases this can increase such noises. Default: no.
; eld-device = ... # If this is an HDMI port, set to "auto" so that PulseAudio will try to read
; # the monitor ELD information from the ALSA mixer. By default the ELD information
; # is not read, because it's only applicable with HDMI. Earlier the "auto" option
; # didn't exist, and the hw device index had to be manually configured. For
; # backwards compatibility, it's still possible to manually configure the device
; # index using this option.
;
; [Properties] # Property list for this path. The list is merged into the port property list.
; <key> = <value> # Each property is defined on its own line.
; ...
;
; [Option ...:...] # For each option of an enumeration or switch element
; # that shall be exposed as a sink/source port. Needs to
; # be named after the Element, followed by a colon, followed
; # by the option name, resp. on/off if the element is a switch.
; name = ... # Logical name to use in the path identifier
; priority = ... # Priority if this is made into a device port
; required = ignore | enumeration | any # In this element, this option must exist or the path will be invalid. ("any" is an alias for "enumeration".)
; required-any = ignore | enumeration | any # In this element, either this or another option must exist (or an element)
; required-absent = ignore | enumeration | any # In this element, this option must not exist or the path will be invalid
;
; [Element ...] # For each element that we shall control. The "..." here is the element name,
; # or name and index separated by a comma.
; required = ignore | switch | volume | enumeration | any # If set, require this element to be of this kind and available,
; # otherwise don't consider this path valid for the card
; required-any = ignore | switch | volume | enumeration | any # If set, at least one of the elements or jacks with required-any in this
; # path must be present, otherwise this path is invalid for the card
; required-absent = ignore | switch | volume # If set, require this element to not be of this kind and not
; # available, otherwise don't consider this path valid for the card
;
; switch = ignore | mute | off | on | select # What to do with this switch: ignore it, make it follow mute status,
; # always set it to off, always to on, or make it selectable as port.
; # If set to 'select' you need to define an Option section for on
; # and off
; volume = ignore | merge | off | zero | <volume step> # What to do with this volume: ignore it, merge it into the device
; # volume slider, always set it to the lowest value possible, or always
; # set it to 0 dB (for whatever that means), or always set it to
; # <volume step> (this only makes sense in path configurations where
; # the exact hardware and driver are known beforehand).
; volume-limit = <volume step> # Limit the maximum volume by disabling the volume steps above <volume step>.
; enumeration = ignore | select # What to do with this enumeration, ignore it or make it selectable
; # via device ports. If set to 'select' you need to define an Option section
; # for each of the items you want to expose
; direction = playback | capture # Is this relevant only for playback or capture? If not set this will implicitly be
; # set the direction of the PCM device is opened as. Generally this doesn't need to be set
; # unless you have a broken driver that has playback controls marked for capture or vice
; # versa
; direction-try-other = no | yes # If the element does not supported what is requested, try the other direction, too?
;
; override-map.1 = ... # Override the channel mask of the mixer control if the control only exposes a single channel
; override-map.2 = ... # Override the channel masks of the mixer control if the control only exposes two channels
; # Override maps should list for each element channel which high-level channels it controls via a
; # channel mask. A channel mask may either be the name of a single channel, or the words "all-left",
; # "all-right", "all-center", "all-front", "all-rear", and "all" to encode a specific subset of
; # channels in a mask
; [Jack ...] # For each jack that we will use for jack detection
; # The name 'Jack Foo' must match ALSA's 'Foo Jack' control.
; required = ignore | any # If not set to ignore, make the path invalid if this jack control is not present.
; required-absent = ignore | any # If not set to ignore, make the path invalid if this jack control is present.
; required-any = ignore | any # If not set to ignore, make the path invalid if no jack controls and no elements with
; # the required-any are present.
; state.plugged = yes | no | unknown # Normally a plugged jack would mean the port becomes available, and an unplugged means it's
; state.unplugged = yes | no | unknown # unavailable, but the port status can be overridden by specifying state.plugged and/or state.unplugged.
; append-pcm-to-name = no | yes # Add ",pcm=N" to the jack name? N is the hw PCM device index. HDMI jacks have
; # the PCM device index in their name, but different drivers use different
; # numbering schemes, so we can't hardcode the full jack name in our configuration
; # files.
[Element PCM]
switch = mute
volume = ignore
volume-limit = 0.007
override-map.1 = all
override-map.2 = all-left,all-right
[Element External Amplifier]
switch = select
[Option External Amplifier:on]
name = output-amplifier-on
priority = 10
[Option External Amplifier:off]
name = output-amplifier-off
priority = 0
[Element Bass Boost]
switch = select
[Option Bass Boost:on]
name = output-bass-boost-on
priority = 0
[Option Bass Boost:off]
name = output-bass-boost-off
priority = 10
[Element IEC958]
switch = off
[Element IEC958 Optical Raw]
switch = off
;;; 'Analog Output'
[Element Analog Output]
enumeration = select
[Option Analog Output:Speakers]
name = output-speaker
priority = 10
[Option Analog Output:Headphones]
name = output-headphones
priority = 9
[Option Analog Output:FP Headphones]
name = output-headphones
priority = 8

View File

@ -1,3 +0,0 @@
echo $1
qrencode -t ansiutf8 "$1"

View File

@ -1,3 +0,0 @@
python3 -m radicale --config "~/.config/radicale/config"

View File

@ -1 +0,0 @@
adb shell rm /data/system/locksettings.db

View File

@ -1 +0,0 @@
convert -resize 50% $1 $1.resized

View File

@ -1,7 +0,0 @@
#bluetoothctl &&
.scripts/nvidia-oc.sh
cd "/mnt/Game-ssd/SteamLibrary/steamapps/common/Shadow of the Tomb Raider"
./bin/ShadowOfTheTombRaider

View File

@ -1,8 +0,0 @@
echo "starting vdirsyncer sync"
vdirsyncer sync
echo "starting khal/ikhal"
ikhal
echo "starting vdirsyncer sync"
vdirsyncer sync

View File

@ -1 +0,0 @@
ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 -c 3des-cbc admin@192.168.1.1

View File

@ -1,2 +0,0 @@
export VK_ICD_FILENAMES="/usr/share/vulkan/icd.d/nvidia_icd.json"

View File

@ -1,2 +0,0 @@
startx /usr/bin/steamos-session -- :3
# when stutering video libva-vdpau-driver and lib32-vdpau

View File

@ -1,6 +0,0 @@
if [ "$1" == "zoom_in" ]; then
nvidia-settings --assign CurrentMetaMode="HDMI-0: 1360x768_60 +0+0 { ViewPortIn=800x600 }"
fi
if [ "$1" == "zoom_out" ]; then
nvidia-settings --assign CurrentMetaMode="HDMI-0: 1360x768_60 +0+0 { ViewPortIn=1360x768 }"
fi

View File

@ -1,5 +0,0 @@
cd /home/ccppi/Downloads/dgvoodo/Syberia/
WINEPREFIX=~/.local/share/Steam/steamapps/compatdata/46500/pfx wine dgVoodooCpl.exe
#DXVK_HUD=devinfo,fps,gpuload,memory DXVK_FRAME_RATE=60 WINEDLLOVERRIDES="D3D9.dll=n;D3D8.dll=n;D3DImm.dll=n;DDraw.dll=n" %command%

View File

@ -1 +0,0 @@
ssh -L 9090:127.0.0.1:8384 alarm@192.168.1.4 -p9541

View File

@ -1,28 +0,0 @@
#!/bin/sh
#
# Write/remove a task to do later.
#
# Select an existing entry to remove it from the file, or type a new entry to
# add it.
#
file="$HOME/.todo"
touch "$file"
height=$(wc -l "$file" | awk '{print $1}')
prompt="Add/delete a task: "
cmd=$(dmenu -l "$height" -p "$prompt" "$@" < "$file")
while [ -n "$cmd" ]; do
if grep -q "^$cmd\$" "$file"; then
grep -v "^$cmd\$" "$file" > "$file.$$"
mv "$file.$$" "$file"
height=$(( height - 1 ))
else
echo "$cmd" >> "$file"
height=$(( height + 1 ))
fi
cmd=$(dmenu -l "$height" -p "$prompt" "$@" < "$file")
done
exit 0

View File

@ -1 +0,0 @@
udevadm control --reload-rules && udevadm trigger

View File

@ -1 +0,0 @@
:w !sudo tee %

View File

@ -1,4 +0,0 @@
#!/bin/bash
sudo nmcli radio wifi off
sudo rfkill unblock wlan

View File

@ -1,14 +0,0 @@
#export VK_ICD_FILENAMES=/usr/share/vulkan/icd.d/radeon_icd.i686.json:/usr/share/vulkan/icd.d/radeon_icd.x86_64.json
path=/usr/share/vulkan/icd.d/
echo "https://gitlab.freedesktop.org/mesa/mesa/-/issues/4112"
echo "remove tha strange shit"
sudo rm $path/intel_icd.i686.json.disabled
sudo rm $path/intel_icd.x86_64.json.disabled
sudo mv $path/intel_icd.i686.json $path/intel_icd.i686.json.disabled
sudo mv $path/intel_icd.x86_64.json $path/intel_icd.x86_64.json.disabled
#sudo mv $path/nvidia_icd.json $path/nvidia_icd.json.disabled
echo " it doesnt work? look in /usr/share/vulkan/icd.d/"

View File

@ -1,10 +0,0 @@
killall -9 wineserver
killall -9 winemenubuilder
killall -9 winedevice.exe
killall -9 winedevice.exe
killall -9 winedbg
killall -9 wine
killall -9 wineboot.exe
echo "Running wine-fuckers"
ps -e | grep wine

View File

@ -1,8 +0,0 @@
rm -f ~/.local/share/applications/wine-extension*.desktop
rm -f ~/.local/share/icons/hicolor/*/*/application-x-wine-extension*
rm -f ~/.local/share/applications/mimeinfo.cache
rm -f ~/.local/share/mime/packages/x-wine*
rm -f ~/.local/share/mime/application/x-wine-extension*
rm -f ~/.local/share/applications/wine/wine-extension*
update-desktop-database ~/.local/share/applications
update-mime-database ~/.local/share/mime/

View File

@ -1,20 +0,0 @@
#dependencies
#kdialog youtube-dl
folder=$(date +"%m_%Y")
cd ~/Music/
mkdir $folder
cd $folder
url=$(kdialog --title "Input dialog" --inputbox "Paste youtube link")
echo "eingegebener link: " $url
youtube-dl -i --extract-audio --audio-format vorbis -o "%(title)s.%(ext)s" $url
kdialog --title "the link "$url" has finished" --passivepopup \
"Download and conversion finnished" 10